This is a note to let you know that I've just added the patch titled
mmc: dw_mmc: Use device_property_read instead of of_property_read
to the 4.9-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
mmc-dw_mmc-use-device_property_read-instead-of-of_property_read.patch
and it can be found in the queue-4.9 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
>From 852ff5fea9eb6a9799f1881d6df2cd69a9e6eed5 Mon Sep 17 00:00:00 2001
From: David Woods <dwoods@xxxxxxxxxxxx>
Date: Fri, 26 May 2017 17:53:20 -0400
Subject: mmc: dw_mmc: Use device_property_read instead of of_property_read
From: David Woods <dwoods@xxxxxxxxxxxx>
commit 852ff5fea9eb6a9799f1881d6df2cd69a9e6eed5 upstream.
Using the device_property interfaces allows the dw_mmc driver to work
on platforms which run on either device tree or ACPI.
Signed-off-by: David Woods <dwoods@xxxxxxxxxxxx>
Reviewed-by: Chris Metcalf <cmetcalf@xxxxxxxxxxxx>
Acked-by: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
Signed-off-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/mmc/host/dw_mmc.c | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -2610,8 +2610,8 @@ static int dw_mci_init_slot(struct dw_mc
host->slot[id] = slot;
mmc->ops = &dw_mci_ops;
- if (of_property_read_u32_array(host->dev->of_node,
- "clock-freq-min-max", freq, 2)) {
+ if (device_property_read_u32_array(host->dev, "clock-freq-min-max",
+ freq, 2)) {
mmc->f_min = DW_MCI_FREQ_MIN;
mmc->f_max = DW_MCI_FREQ_MAX;
} else {
@@ -2709,7 +2709,6 @@ static void dw_mci_init_dma(struct dw_mc
{
int addr_config;
struct device *dev = host->dev;
- struct device_node *np = dev->of_node;
/*
* Check tansfer mode from HCON[17:16]
@@ -2770,8 +2769,9 @@ static void dw_mci_init_dma(struct dw_mc
dev_info(host->dev, "Using internal DMA controller.\n");
} else {
/* TRANS_MODE_EDMAC: check dma bindings again */
- if ((of_property_count_strings(np, "dma-names") < 0) ||
- (!of_find_property(np, "dmas", NULL))) {
+ if ((device_property_read_string_array(dev, "dma-names",
+ NULL, 0) < 0) ||
+ !device_property_present(dev, "dmas")) {
goto no_dma;
}
host->dma_ops = &dw_mci_edmac_ops;
@@ -2931,7 +2931,6 @@ static struct dw_mci_board *dw_mci_parse
{
struct dw_mci_board *pdata;
struct device *dev = host->dev;
- struct device_node *np = dev->of_node;
const struct dw_mci_drv_data *drv_data = host->drv_data;
int ret;
u32 clock_frequency;
@@ -2948,15 +2947,16 @@ static struct dw_mci_board *dw_mci_parse
}
/* find out number of slots supported */
- of_property_read_u32(np, "num-slots", &pdata->num_slots);
+ device_property_read_u32(dev, "num-slots", &pdata->num_slots);
- if (of_property_read_u32(np, "fifo-depth", &pdata->fifo_depth))
+ if (device_property_read_u32(dev, "fifo-depth", &pdata->fifo_depth))
dev_info(dev,
"fifo-depth property not found, using value of FIFOTH register as default\n");
- of_property_read_u32(np, "card-detect-delay", &pdata->detect_delay_ms);
+ device_property_read_u32(dev, "card-detect-delay",
+ &pdata->detect_delay_ms);
- if (!of_property_read_u32(np, "clock-frequency", &clock_frequency))
+ if (!device_property_read_u32(dev, "clock-frequency", &clock_frequency))
pdata->bus_hz = clock_frequency;
if (drv_data && drv_data->parse_dt) {
Patches currently in stable-queue which might be from dwoods@xxxxxxxxxxxx are
queue-4.9/mmc-core-use-device_property_read-instead-of-of_property_read.patch
queue-4.9/mmc-dw_mmc-use-device_property_read-instead-of-of_property_read.patch