This is a note to let you know that I've just added the patch titled
mmc: sunxi: Keep default timing phase settings for new timing mode
to the 4.12-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
mmc-sunxi-keep-default-timing-phase-settings-for-new-timing-mode.patch
and it can be found in the queue-4.12 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
>From 26cb2be4c7c42644ccd147c786edb9006300ee56 Mon Sep 17 00:00:00 2001
From: Chen-Yu Tsai <wens@xxxxxxxx>
Date: Fri, 14 Jul 2017 14:42:55 +0800
Subject: mmc: sunxi: Keep default timing phase settings for new timing mode
From: Chen-Yu Tsai <wens@xxxxxxxx>
commit 26cb2be4c7c42644ccd147c786edb9006300ee56 upstream.
The register for the "new timing mode" also has bit fields for setting
output and sample timing phases. According to comments in Allwinner's
BSP kernel, the default values are good enough.
Keep the default values already in the hardware when setting new timing
mode, instead of overwriting the whole register.
Fixes: 9a37e53e451e ("mmc: sunxi: Enable the new timings for the A64 MMC
controllers")
Signed-off-by: Chen-Yu Tsai <wens@xxxxxxxx>
Acked-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
Signed-off-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/mmc/host/sunxi-mmc.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
--- a/drivers/mmc/host/sunxi-mmc.c
+++ b/drivers/mmc/host/sunxi-mmc.c
@@ -793,8 +793,12 @@ static int sunxi_mmc_clk_set_rate(struct
}
mmc_writel(host, REG_CLKCR, rval);
- if (host->cfg->needs_new_timings)
- mmc_writel(host, REG_SD_NTSR, SDXC_2X_TIMING_MODE);
+ if (host->cfg->needs_new_timings) {
+ /* Don't touch the delay bits */
+ rval = mmc_readl(host, REG_SD_NTSR);
+ rval |= SDXC_2X_TIMING_MODE;
+ mmc_writel(host, REG_SD_NTSR, rval);
+ }
ret = sunxi_mmc_clk_set_phase(host, ios, rate);
if (ret)
Patches currently in stable-queue which might be from wens@xxxxxxxx are
queue-4.12/mmc-sunxi-keep-default-timing-phase-settings-for-new-timing-mode.patch