Patch "net/phy: micrel: configure intterupts after autoneg workaround" has been added to the 4.9-stable tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This is a note to let you know that I've just added the patch titled

    net/phy: micrel: configure intterupts after autoneg workaround

to the 4.9-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     net-phy-micrel-configure-intterupts-after-autoneg-workaround.patch
and it can be found in the queue-4.9 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.


>From b866203d872d5deeafcecd25ea429d6748b5bd56 Mon Sep 17 00:00:00 2001
From: Zach Brown <zach.brown@xxxxxx>
Date: Tue, 20 Jun 2017 12:48:11 -0500
Subject: net/phy: micrel: configure intterupts after autoneg workaround

From: Zach Brown <zach.brown@xxxxxx>

commit b866203d872d5deeafcecd25ea429d6748b5bd56 upstream.

The commit ("net/phy: micrel: Add workaround for bad autoneg") fixes an
autoneg failure case by resetting the hardware. This turns off
intterupts. Things will work themselves out if the phy polls, as it will
figure out it's state during a poll. However if the phy uses only
intterupts, the phy will stall, since interrupts are off. This patch
fixes the issue by calling config_intr after resetting the phy.

Fixes: d2fd719bcb0e ("net/phy: micrel: Add workaround for bad autoneg ")
Signed-off-by: Zach Brown <zach.brown@xxxxxx>
Reviewed-by: Andrew Lunn <andrew@xxxxxxx>
Reviewed-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
 drivers/net/phy/micrel.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -622,6 +622,8 @@ static int ksz9031_read_status(struct ph
 	if ((regval & 0xFF) == 0xFF) {
 		phy_init_hw(phydev);
 		phydev->link = 0;
+		if (phydev->drv->config_intr && phy_interrupt_is_valid(phydev))
+			phydev->drv->config_intr(phydev);
 	}
 
 	return 0;


Patches currently in stable-queue which might be from zach.brown@xxxxxx are

queue-4.9/net-phy-micrel-configure-intterupts-after-autoneg-workaround.patch



[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]