Patch "pinctrl: mxs: atomically switch mux and drive strength config" has been added to the 3.18-stable tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This is a note to let you know that I've just added the patch titled

    pinctrl: mxs: atomically switch mux and drive strength config

to the 3.18-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     pinctrl-mxs-atomically-switch-mux-and-drive-strength-config.patch
and it can be found in the queue-3.18 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.


>From da6c2addf66d7ff7d0b090d6267d4292f951e4e6 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= <u.kleine-koenig@xxxxxxxxxxxxxx>
Date: Thu, 18 May 2017 11:23:55 +0200
Subject: pinctrl: mxs: atomically switch mux and drive strength config
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>

commit da6c2addf66d7ff7d0b090d6267d4292f951e4e6 upstream.

To set the mux mode of a pin two bits must be set. Up to now this is
implemented using the following idiom:

	writel(mask, reg + CLR);
	writel(value, reg + SET);

. This however results in the mux mode being 0 between the two writes.

On my machine there is an IC's reset pin connected to LCD_D20. The
bootloader configures this pin as GPIO output-high (i.e. not holding the
IC in reset). When Linux reconfigures the pin to GPIO the short time
LCD_D20 is muxed as LCD_D20 instead of GPIO_1_20 is enough to confuse
the connected IC.

The same problem is present for the pin's drive strength setting which is
reset to low drive strength before using the right value.

So instead of relying on the hardware to modify the register setting
using two writes implement the bit toggling using read-modify-write.

Fixes: 17723111e64f ("pinctrl: add pinctrl-mxs support")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
Acked-by: Shawn Guo <shawnguo@xxxxxxxxxx>
Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
 drivers/pinctrl/freescale/pinctrl-mxs.c |   16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

--- a/drivers/pinctrl/freescale/pinctrl-mxs.c
+++ b/drivers/pinctrl/freescale/pinctrl-mxs.c
@@ -195,6 +195,16 @@ static int mxs_pinctrl_get_func_groups(s
 	return 0;
 }
 
+static void mxs_pinctrl_rmwl(u32 value, u32 mask, u8 shift, void __iomem *reg)
+{
+	u32 tmp;
+
+	tmp = readl(reg);
+	tmp &= ~(mask << shift);
+	tmp |= value << shift;
+	writel(tmp, reg);
+}
+
 static int mxs_pinctrl_set_mux(struct pinctrl_dev *pctldev, unsigned selector,
 			       unsigned group)
 {
@@ -212,8 +222,7 @@ static int mxs_pinctrl_set_mux(struct pi
 		reg += bank * 0x20 + pin / 16 * 0x10;
 		shift = pin % 16 * 2;
 
-		writel(0x3 << shift, reg + CLR);
-		writel(g->muxsel[i] << shift, reg + SET);
+		mxs_pinctrl_rmwl(g->muxsel[i], 0x3, shift, reg);
 	}
 
 	return 0;
@@ -280,8 +289,7 @@ static int mxs_pinconf_group_set(struct
 			/* mA */
 			if (config & MA_PRESENT) {
 				shift = pin % 8 * 4;
-				writel(0x3 << shift, reg + CLR);
-				writel(ma << shift, reg + SET);
+				mxs_pinctrl_rmwl(ma, 0x3, shift, reg);
 			}
 
 			/* vol */


Patches currently in stable-queue which might be from u.kleine-koenig@xxxxxxxxxxxxxx are

queue-3.18/pinctrl-mxs-atomically-switch-mux-and-drive-strength-config.patch



[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]