4.4-stable review patch. If anyone has any objections, please let me know. ------------------ From: Gavin Shan <gwshan@xxxxxxxxxxxxxxxxxx> [ Upstream commit 387bbc974f6adf91aa635090f73434ed10edd915 ] We give up recovery on permanent error, simply shutdown the affected devices and remove them. If the devices can't be put into quiet state, they spew more traffic that is likely to cause another unexpected EEH error. This was observed on "p8dtu2u" machine: 0002:00:00.0 PCI bridge: IBM Device 03dc 0002:01:00.0 Ethernet controller: Intel Corporation \ Ethernet Controller X710/X557-AT 10GBASE-T (rev 02) 0002:01:00.1 Ethernet controller: Intel Corporation \ Ethernet Controller X710/X557-AT 10GBASE-T (rev 02) 0002:01:00.2 Ethernet controller: Intel Corporation \ Ethernet Controller X710/X557-AT 10GBASE-T (rev 02) 0002:01:00.3 Ethernet controller: Intel Corporation \ Ethernet Controller X710/X557-AT 10GBASE-T (rev 02) On P8 PowerNV platform, the IO path is frozen when shutdowning the devices, meaning the memory registers are inaccessible. It is why the devices can't be put into quiet state before removing them. This fixes the issue by enabling IO path prior to putting the devices into quiet state. Reported-by: Pridhiviraj Paidipeddi <ppaidipe@xxxxxxxxxxxxxxxxxx> Signed-off-by: Gavin Shan <gwshan@xxxxxxxxxxxxxxxxxx> Acked-by: Russell Currey <ruscur@xxxxxxxxxx> Signed-off-by: Michael Ellerman <mpe@xxxxxxxxxxxxxx> Signed-off-by: Sasha Levin <alexander.levin@xxxxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- arch/powerpc/kernel/eeh.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) --- a/arch/powerpc/kernel/eeh.c +++ b/arch/powerpc/kernel/eeh.c @@ -304,9 +304,17 @@ void eeh_slot_error_detail(struct eeh_pe * * For pHyp, we have to enable IO for log retrieval. Otherwise, * 0xFF's is always returned from PCI config space. + * + * When the @severity is EEH_LOG_PERM, the PE is going to be + * removed. Prior to that, the drivers for devices included in + * the PE will be closed. The drivers rely on working IO path + * to bring the devices to quiet state. Otherwise, PCI traffic + * from those devices after they are removed is like to cause + * another unexpected EEH error. */ if (!(pe->type & EEH_PE_PHB)) { - if (eeh_has_flag(EEH_ENABLE_IO_FOR_LOG)) + if (eeh_has_flag(EEH_ENABLE_IO_FOR_LOG) || + severity == EEH_LOG_PERM) eeh_pci_enable(pe, EEH_OPT_THAW_MMIO); /*