Inheriting the ADC BIAS current settings from the BIOS instead of hardcoding then causes the AXP288 to disable charging (I think it mis-detects an overheated battery) on at least one model tablet. So lets go back to hard coding the values, this reverts commit fa2849e9649b ("iio: adc: axp288: Drop bogus AXP288_ADC_TS_PIN_CTRL register modifications"), fixing charging not working on the model tablet in question. Cc: stable@xxxxxxxxxxxxxxx Reported-by: Umberto Ixxo <sfumato1977@xxxxxxxxx> Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx> --- drivers/iio/adc/axp288_adc.c | 32 +++++++++++++++++++++++++++++++- 1 file changed, 31 insertions(+), 1 deletion(-) diff --git a/drivers/iio/adc/axp288_adc.c b/drivers/iio/adc/axp288_adc.c index 64799ad7ebad..7fd24949c0c1 100644 --- a/drivers/iio/adc/axp288_adc.c +++ b/drivers/iio/adc/axp288_adc.c @@ -28,6 +28,8 @@ #include <linux/iio/driver.h> #define AXP288_ADC_EN_MASK 0xF1 +#define AXP288_ADC_TS_PIN_GPADC 0xF2 +#define AXP288_ADC_TS_PIN_ON 0xF3 enum axp288_adc_id { AXP288_ADC_TS, @@ -121,6 +123,16 @@ static int axp288_adc_read_channel(int *val, unsigned long address, return IIO_VAL_INT; } +static int axp288_adc_set_ts(struct regmap *regmap, unsigned int mode, + unsigned long address) +{ + /* channels other than GPADC do not need to switch TS pin */ + if (address != AXP288_GP_ADC_H) + return 0; + + return regmap_write(regmap, AXP288_ADC_TS_PIN_CTRL, mode); +} + static int axp288_adc_read_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, int *val, int *val2, long mask) @@ -131,7 +143,16 @@ static int axp288_adc_read_raw(struct iio_dev *indio_dev, mutex_lock(&indio_dev->mlock); switch (mask) { case IIO_CHAN_INFO_RAW: + if (axp288_adc_set_ts(info->regmap, AXP288_ADC_TS_PIN_GPADC, + chan->address)) { + dev_err(&indio_dev->dev, "GPADC mode\n"); + ret = -EINVAL; + break; + } ret = axp288_adc_read_channel(val, chan->address, info->regmap); + if (axp288_adc_set_ts(info->regmap, AXP288_ADC_TS_PIN_ON, + chan->address)) + dev_err(&indio_dev->dev, "TS pin restore\n"); break; default: ret = -EINVAL; @@ -141,6 +162,15 @@ static int axp288_adc_read_raw(struct iio_dev *indio_dev, return ret; } +static int axp288_adc_set_state(struct regmap *regmap) +{ + /* ADC should be always enabled for internal FG to function */ + if (regmap_write(regmap, AXP288_ADC_TS_PIN_CTRL, AXP288_ADC_TS_PIN_ON)) + return -EIO; + + return regmap_write(regmap, AXP20X_ADC_EN1, AXP288_ADC_EN_MASK); +} + static const struct iio_info axp288_adc_iio_info = { .read_raw = &axp288_adc_read_raw, .driver_module = THIS_MODULE, @@ -169,7 +199,7 @@ static int axp288_adc_probe(struct platform_device *pdev) * Set ADC to enabled state at all time, including system suspend. * otherwise internal fuel gauge functionality may be affected. */ - ret = regmap_write(info->regmap, AXP20X_ADC_EN1, AXP288_ADC_EN_MASK); + ret = axp288_adc_set_state(axp20x->regmap); if (ret) { dev_err(&pdev->dev, "unable to enable ADC device\n"); return ret; -- 2.13.0