This is a note to let you know that I've just added the patch titled
net: phy: Initialize mdio clock at probe function
to the 4.9-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
net-phy-initialize-mdio-clock-at-probe-function.patch
and it can be found in the queue-4.9 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
>From bb1a619735b4660f21bce3e728b937640024b4ad Mon Sep 17 00:00:00 2001
From: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@xxxxxxxxxxxx>
Date: Wed, 8 Feb 2017 17:14:26 -0500
Subject: net: phy: Initialize mdio clock at probe function
From: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@xxxxxxxxxxxx>
commit bb1a619735b4660f21bce3e728b937640024b4ad upstream.
USB PHYs need the MDIO clock divisor enabled earlier to work.
Initialize mdio clock divisor in probe function. The ext bus
bit available in the same register will be used by mdio mux
to enable external mdio.
Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@xxxxxxxxxxxx>
Fixes: ddc24ae1 ("net: phy: Broadcom iProc MDIO bus driver")
Reviewed-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
Signed-off-by: Jon Mason <jon.mason@xxxxxxxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Amit Pundir <amit.pundir@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/net/phy/mdio-bcm-iproc.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
--- a/drivers/net/phy/mdio-bcm-iproc.c
+++ b/drivers/net/phy/mdio-bcm-iproc.c
@@ -81,8 +81,6 @@ static int iproc_mdio_read(struct mii_bu
if (rc)
return rc;
- iproc_mdio_config_clk(priv->base);
-
/* Prepare the read operation */
cmd = (MII_DATA_TA_VAL << MII_DATA_TA_SHIFT) |
(reg << MII_DATA_RA_SHIFT) |
@@ -112,8 +110,6 @@ static int iproc_mdio_write(struct mii_b
if (rc)
return rc;
- iproc_mdio_config_clk(priv->base);
-
/* Prepare the write operation */
cmd = (MII_DATA_TA_VAL << MII_DATA_TA_SHIFT) |
(reg << MII_DATA_RA_SHIFT) |
@@ -163,6 +159,8 @@ static int iproc_mdio_probe(struct platf
bus->read = iproc_mdio_read;
bus->write = iproc_mdio_write;
+ iproc_mdio_config_clk(priv->base);
+
rc = of_mdiobus_register(bus, pdev->dev.of_node);
if (rc) {
dev_err(&pdev->dev, "MDIO bus registration failed\n");
Patches currently in stable-queue which might be from yendapally.reddy@xxxxxxxxxxxx are
queue-4.9/net-phy-initialize-mdio-clock-at-probe-function.patch