[PATCH] KVM: x86: fix singlestepping over syscall

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Paolo Bonzini <pbonzini@xxxxxxxxxx>

TF is handled a bit differently for syscall and sysret, compared
to the other instructions: TF is checked after the instruction completes,
so that the OS can disable #DB at a syscall by adding TF to FMASK.
When the sysret is executed the #DB is taken "as if" the syscall insn
just completed.

KVM emulates syscall so that it can trap 32-bit syscall on Intel processors.
Fix the behavior, otherwise you could get #DB on a user stack which is not
nice.  This does not affect Linux guests, as they use an IST or task gate
for #DB.

This fixes CVE-2017-7518.

Cc: stable@xxxxxxxxxxxxxxx
Reported-by: Andy Lutomirski <luto@xxxxxxxxxx>
Signed-off-by: Paolo Bonzini <pbonzini@xxxxxxxxxx>
Signed-off-by: Radim Krčmář <rkrcmar@xxxxxxxxxx>
---
 The patch is included in the following pull request to Linus.

 arch/x86/include/asm/kvm_emulate.h |  1 +
 arch/x86/kvm/emulate.c             |  1 +
 arch/x86/kvm/x86.c                 | 62 ++++++++++++++++++++------------------
 3 files changed, 34 insertions(+), 30 deletions(-)

diff --git a/arch/x86/include/asm/kvm_emulate.h b/arch/x86/include/asm/kvm_emulate.h
index 055962615779..722d0e568863 100644
--- a/arch/x86/include/asm/kvm_emulate.h
+++ b/arch/x86/include/asm/kvm_emulate.h
@@ -296,6 +296,7 @@ struct x86_emulate_ctxt {
 
 	bool perm_ok; /* do not check permissions if true */
 	bool ud;	/* inject an #UD if host doesn't support insn */
+	bool tf;	/* TF value before instruction (after for syscall/sysret) */
 
 	bool have_exception;
 	struct x86_exception exception;
diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c
index 0816ab2e8adc..80890dee66ce 100644
--- a/arch/x86/kvm/emulate.c
+++ b/arch/x86/kvm/emulate.c
@@ -2742,6 +2742,7 @@ static int em_syscall(struct x86_emulate_ctxt *ctxt)
 		ctxt->eflags &= ~(X86_EFLAGS_VM | X86_EFLAGS_IF);
 	}
 
+	ctxt->tf = (ctxt->eflags & X86_EFLAGS_TF) != 0;
 	return X86EMUL_CONTINUE;
 }
 
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 87d3cb901935..0e846f0cb83b 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -5313,6 +5313,8 @@ static void init_emulate_ctxt(struct kvm_vcpu *vcpu)
 	kvm_x86_ops->get_cs_db_l_bits(vcpu, &cs_db, &cs_l);
 
 	ctxt->eflags = kvm_get_rflags(vcpu);
+	ctxt->tf = (ctxt->eflags & X86_EFLAGS_TF) != 0;
+
 	ctxt->eip = kvm_rip_read(vcpu);
 	ctxt->mode = (!is_protmode(vcpu))		? X86EMUL_MODE_REAL :
 		     (ctxt->eflags & X86_EFLAGS_VM)	? X86EMUL_MODE_VM86 :
@@ -5528,36 +5530,25 @@ static int kvm_vcpu_check_hw_bp(unsigned long addr, u32 type, u32 dr7,
 	return dr6;
 }
 
-static void kvm_vcpu_check_singlestep(struct kvm_vcpu *vcpu, unsigned long rflags, int *r)
+static void kvm_vcpu_do_singlestep(struct kvm_vcpu *vcpu, int *r)
 {
 	struct kvm_run *kvm_run = vcpu->run;
 
-	/*
-	 * rflags is the old, "raw" value of the flags.  The new value has
-	 * not been saved yet.
-	 *
-	 * This is correct even for TF set by the guest, because "the
-	 * processor will not generate this exception after the instruction
-	 * that sets the TF flag".
-	 */
-	if (unlikely(rflags & X86_EFLAGS_TF)) {
-		if (vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP) {
-			kvm_run->debug.arch.dr6 = DR6_BS | DR6_FIXED_1 |
-						  DR6_RTM;
-			kvm_run->debug.arch.pc = vcpu->arch.singlestep_rip;
-			kvm_run->debug.arch.exception = DB_VECTOR;
-			kvm_run->exit_reason = KVM_EXIT_DEBUG;
-			*r = EMULATE_USER_EXIT;
-		} else {
-			/*
-			 * "Certain debug exceptions may clear bit 0-3.  The
-			 * remaining contents of the DR6 register are never
-			 * cleared by the processor".
-			 */
-			vcpu->arch.dr6 &= ~15;
-			vcpu->arch.dr6 |= DR6_BS | DR6_RTM;
-			kvm_queue_exception(vcpu, DB_VECTOR);
-		}
+	if (vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP) {
+		kvm_run->debug.arch.dr6 = DR6_BS | DR6_FIXED_1 | DR6_RTM;
+		kvm_run->debug.arch.pc = vcpu->arch.singlestep_rip;
+		kvm_run->debug.arch.exception = DB_VECTOR;
+		kvm_run->exit_reason = KVM_EXIT_DEBUG;
+		*r = EMULATE_USER_EXIT;
+	} else {
+		/*
+		 * "Certain debug exceptions may clear bit 0-3.  The
+		 * remaining contents of the DR6 register are never
+		 * cleared by the processor".
+		 */
+		vcpu->arch.dr6 &= ~15;
+		vcpu->arch.dr6 |= DR6_BS | DR6_RTM;
+		kvm_queue_exception(vcpu, DB_VECTOR);
 	}
 }
 
@@ -5567,7 +5558,17 @@ int kvm_skip_emulated_instruction(struct kvm_vcpu *vcpu)
 	int r = EMULATE_DONE;
 
 	kvm_x86_ops->skip_emulated_instruction(vcpu);
-	kvm_vcpu_check_singlestep(vcpu, rflags, &r);
+
+	/*
+	 * rflags is the old, "raw" value of the flags.  The new value has
+	 * not been saved yet.
+	 *
+	 * This is correct even for TF set by the guest, because "the
+	 * processor will not generate this exception after the instruction
+	 * that sets the TF flag".
+	 */
+	if (unlikely(rflags & X86_EFLAGS_TF))
+		kvm_vcpu_do_singlestep(vcpu, &r);
 	return r == EMULATE_DONE;
 }
 EXPORT_SYMBOL_GPL(kvm_skip_emulated_instruction);
@@ -5726,8 +5727,9 @@ int x86_emulate_instruction(struct kvm_vcpu *vcpu,
 		toggle_interruptibility(vcpu, ctxt->interruptibility);
 		vcpu->arch.emulate_regs_need_sync_to_vcpu = false;
 		kvm_rip_write(vcpu, ctxt->eip);
-		if (r == EMULATE_DONE)
-			kvm_vcpu_check_singlestep(vcpu, rflags, &r);
+		if (r == EMULATE_DONE &&
+		    (ctxt->tf || (vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP)))
+			kvm_vcpu_do_singlestep(vcpu, &r);
 		if (!ctxt->have_exception ||
 		    exception_type(ctxt->exception.vector) == EXCPT_TRAP)
 			__kvm_set_rflags(vcpu, ctxt->eflags);
-- 
2.13.1




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]