virtio_scsi tries to do exception handling after the default
30 seconds timeout expires. However, it's better to let the host
control the timeout, otherwise with a heavy I/O load it is
likely that an abort will also timeout. This leads to fatal
errors like filesystems going offline.
Disable the 'sd' timeout and allow the host to do exception
handling, following the precedent of the storvsc driver.
Hannes has a proposal to introduce timeouts in virtio, but
this provides an immediate solution for stable kernels too.
Reported-by: Douglas Miller <dougmill@xxxxxxxxxxxxxxxxxx>
Cc: "James E.J. Bottomley" <jejb@xxxxxxxxxxxxxxxxxx>
Cc: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
Cc: Hannes Reinecke <hare@xxxxxxx>
Cc: linux-scsi@xxxxxxxxxxxxxxx
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Paolo Bonzini <pbonzini@xxxxxxxxxx>
---
drivers/scsi/virtio_scsi.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/drivers/scsi/virtio_scsi.c b/drivers/scsi/virtio_scsi.c
index f8dbfeee6c63..55d344ea6869 100644
--- a/drivers/scsi/virtio_scsi.c
+++ b/drivers/scsi/virtio_scsi.c
@@ -796,6 +796,16 @@ static int virtscsi_map_queues(struct Scsi_Host *shost)
return blk_mq_virtio_map_queues(&shost->tag_set, vscsi->vdev, 2);
}
+/*
+ * The host guarantees to respond to each command, although I/O latencies might
+ * be higher than on bare meta. Reset the timer unconditionally to give the
+ * host a chance to perform EH.
+ */
+static enum blk_eh_timer_return virtscsi_eh_timed_out(struct scsi_cmnd *scmnd)
+{
+ return BLK_EH_RESET_TIMER;
+}
+
static struct scsi_host_template virtscsi_host_template_single = {
.module = THIS_MODULE,
.name = "Virtio SCSI HBA",
@@ -806,6 +816,7 @@ static struct scsi_host_template virtscsi_host_template_single = {
.change_queue_depth = virtscsi_change_queue_depth,
.eh_abort_handler = virtscsi_abort,
.eh_device_reset_handler = virtscsi_device_reset,
+ .eh_timed_out = virtscsi_eh_timed_out,
.slave_alloc = virtscsi_device_alloc,
.can_queue = 1024,
@@ -826,6 +837,7 @@ static struct scsi_host_template virtscsi_host_template_multi = {
.change_queue_depth = virtscsi_change_queue_depth,
.eh_abort_handler = virtscsi_abort,
.eh_device_reset_handler = virtscsi_device_reset,
+ .eh_timed_out = virtscsi_eh_timed_out,
.can_queue = 1024,
.dma_boundary = UINT_MAX,
--
2.13.0