From: Michael Schenk <michael.schenk@xxxxxxxxxxxxxxx>
commit 575ddce0507789bf9830d089557d2199d2f91865 upstream.
In the function rtl_usb_start we pre-allocate a certain number of urbs
for RX path but they will not be freed when calling rtl_usb_stop. This
results in leaking urbs when doing ifconfig up and down. Eventually,
the system has no available urbs.
Signed-off-by: Michael Schenk <michael.schenk@xxxxxxxxxxxxxxx>
Signed-off-by: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
Signed-off-by: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
Signed-off-by: Willy Tarreau <w@xxxxxx>
---
drivers/net/wireless/rtlwifi/usb.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/drivers/net/wireless/rtlwifi/usb.c b/drivers/net/wireless/rtlwifi/usb.c
index 3ad79736..3fc7d08 100644
--- a/drivers/net/wireless/rtlwifi/usb.c
+++ b/drivers/net/wireless/rtlwifi/usb.c
@@ -823,6 +823,7 @@ static void rtl_usb_stop(struct ieee80211_hw *hw)
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
struct rtl_usb *rtlusb = rtl_usbdev(rtl_usbpriv(hw));
+ struct urb *urb;
/* should after adapter start and interrupt enable. */
set_hal_stop(rtlhal);
@@ -830,6 +831,23 @@ static void rtl_usb_stop(struct ieee80211_hw *hw)
/* Enable software */
SET_USB_STOP(rtlusb);
rtl_usb_deinit(hw);
+
+ /* free pre-allocated URBs from rtl_usb_start() */
+ usb_kill_anchored_urbs(&rtlusb->rx_submitted);
+
+ tasklet_kill(&rtlusb->rx_work_tasklet);
+ cancel_work_sync(&rtlpriv->works.lps_change_work);
+
+ flush_workqueue(rtlpriv->works.rtl_wq);
+
+ skb_queue_purge(&rtlusb->rx_queue);
+
+ while ((urb = usb_get_from_anchor(&rtlusb->rx_cleanup_urbs))) {
+ usb_free_coherent(urb->dev, urb->transfer_buffer_length,
+ urb->transfer_buffer, urb->transfer_dma);
+ usb_free_urb(urb);
+ }
+
rtlpriv->cfg->ops->hw_disable(hw);
}
--
2.8.0.rc2.1.gbe9624a