Re: [PATCH v4 1/2] PCI: fix the only slot identification in pcie_find_smpss()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Aug 14, 2013 at 2:01 AM, Yijing Wang <wangyijing@xxxxxxxxxx> wrote:
> We use list_is_singular() to identify the slot whether is
> only slot directly connected to the root port in
> pcie_find_smpss(). It's not correct, if we have only slot
> connected to root port, and this slot has two function devices.
> list_is_singular() return false. This patch introduces
> pci_only_one_slot() to fix this issue. In addition, we should
> pass subordinate bus devices list to list_is_singular(), not
> its parent bus devices list.
>
> -+-[0000:40]-+-00.0-[0000:41]--
>     ......................
>  |           +-07.0-[0000:46]--+-00.0  Intel Corporation 82576 Gigabit Network Connection
>  |           |                 \-00.1  Intel Corporation 82576 Gigabit Network Connection
>
> MPS configure after boot up, with boot command "pci=pcie_bus_safe"
>
> linux-ha2:~ # lspci -vvv -s 40:07.0
> 40:07.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 (rev 22) (prog-if 00 [Normal decode])
>         ...............
>         Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00
>                 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
>                         ExtTag+ RBE+ FLReset-
>                 DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
>                         RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>                         MaxPayload 256 bytes, MaxReadReq 128 bytes
>
> linux-ha2:~ # lspci -vvv -s 46:00.0
> 46:00.0 Ethernet controller: Intel Corporation 82576 Gigabit Network Connection (rev 01)
>         ...............
>         Capabilities: [a0] Express (v2) Endpoint, MSI 00
>                 DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
>                         ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+
>                 DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
>                         RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset-
>                         MaxPayload 256 bytes, MaxReadReq 512 bytes
>
> linux-ha2:/sys/bus/pci/slots/7 # echo 0 > power     ------>power off slot
> linux-ha2:/sys/bus/pci/slots/7 # echo 1 > power     ------>power on slot
> linux-ha2:/sys/bus/pci/slots/7 # dmesg
> ................
> pcieport 0000:40:07.0: PCI-E Max Payload Size set to  128/ 256 (was  256), Max Read Rq  128
> pci 0000:46:00.0: PCI-E Max Payload Size set to  128/ 512 (was  128), Max Read Rq  512
> pci 0000:46:00.1: PCI-E Max Payload Size set to  128/ 512 (was  128), Max Read Rq  512
> pcieport 0000:40:07.0: PCI-E Max Payload Size set to  128/ 256 (was  128), Max Read Rq  128
> pci 0000:46:00.0: PCI-E Max Payload Size set to  128/ 512 (was  128), Max Read Rq  512
> pci 0000:46:00.1: PCI-E Max Payload Size set to  128/ 512 (was  128), Max Read Rq  512
> .....
>
> Because 46:00.0 and 46:00.1 function devices are directly connected to root port 40:07.0.
> After slot hot plug, root port mps is 256, slot fun devices(46:00.0/1) mps is 128.
> We should both change root port and slot mps to 256, but now kernel change mps to 128.
>
>
> After applied this patch, dmesg after hot plug:
> ..............
> pcieport 0000:40:07.0: PCI-E Max Payload Size set to  256/ 256 (was  256), Max Read Rq  128
> pci 0000:46:00.0: PCI-E Max Payload Size set to  256/ 512 (was  128), Max Read Rq  512
> pci 0000:46:00.1: PCI-E Max Payload Size set to  256/ 512 (was  128), Max Read Rq  512
> pcieport 0000:40:07.0: PCI-E Max Payload Size set to  256/ 256 (was  256), Max Read Rq  128
> pci 0000:46:00.0: PCI-E Max Payload Size set to  256/ 512 (was  256), Max Read Rq  512
> pci 0000:46:00.1: PCI-E Max Payload Size set to  256/ 512 (was  256), Max Read Rq  512
>
> Signed-off-by: Yijing Wang <wangyijing@xxxxxxxxxx>

Good catch!
Acked-by: Jon Mason <jdmason@xxxxxxxx>

> Cc: Jon Mason <jdmason@xxxxxxxx>
> Cc: stable@xxxxxxxxxxxxxxx # 3.4+
> ---
>  drivers/pci/probe.c |   20 +++++++++++++++++++-
>  1 files changed, 19 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
> index cf57fe7..0699ec0 100644
> --- a/drivers/pci/probe.c
> +++ b/drivers/pci/probe.c
> @@ -1484,6 +1484,24 @@ int pci_scan_slot(struct pci_bus *bus, int devfn)
>         return nr;
>  }
>
> +static bool pci_only_one_slot(struct pci_bus *pbus)
> +{
> +       u8 device;
> +       struct pci_dev *pdev;
> +
> +       if (!pbus || list_empty(&pbus->devices))
> +               return false;
> +
> +       pdev = list_entry(pbus->devices.next,
> +                       struct pci_dev, bus_list);
> +       device = PCI_SLOT(pdev->devfn);
> +       list_for_each_entry(pdev, &pbus->devices, bus_list)
> +               if (PCI_SLOT(pdev->devfn) != device)
> +                       return false;
> +
> +       return true;
> +}
> +
>  static int pcie_find_smpss(struct pci_dev *dev, void *data)
>  {
>         u8 *smpss = data;
> @@ -1506,7 +1524,7 @@ static int pcie_find_smpss(struct pci_dev *dev, void *data)
>          * common case), then this is not an issue and MPS discovery
>          * will occur as normal.
>          */
> -       if (dev->is_hotplug_bridge && (!list_is_singular(&dev->bus->devices) ||
> +       if (dev->is_hotplug_bridge && (!pci_only_one_slot(dev->subordinate) ||
>              (dev->bus->self &&
>               pci_pcie_type(dev->bus->self) != PCI_EXP_TYPE_ROOT_PORT)))
>                 *smpss = 0;
> --
> 1.7.1
>
>
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]