This is a note to let you know that I've just added the patch titled usb: xhci: Fix USB 3.1 supported protocol parsing to the 4.11-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary The filename of the patch is: usb-xhci-fix-usb-3.1-supported-protocol-parsing.patch and it can be found in the queue-4.11 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable@xxxxxxxxxxxxxxx> know about it. >From b72eb8435b25be3a1880264cf32ac91e626ba5ba Mon Sep 17 00:00:00 2001 From: YD Tseng <yd_tseng@xxxxxxxxxxxxxx> Date: Fri, 9 Jun 2017 14:48:40 +0300 Subject: usb: xhci: Fix USB 3.1 supported protocol parsing From: YD Tseng <yd_tseng@xxxxxxxxxxxxxx> commit b72eb8435b25be3a1880264cf32ac91e626ba5ba upstream. xHCI host controllers can have both USB 3.1 and 3.0 extended speed protocol lists. If the USB3.1 speed is parsed first and 3.0 second then the minor revision supported will be overwritten by the 3.0 speeds and the USB3 roothub will only show support for USB 3.0 speeds. This was the case with a xhci controller with the supported protocol capability listed below. In xhci-mem.c, the USB 3.1 speed is parsed first, the min_rev of usb3_rhub is set as 0x10. And then USB 3.0 is parsed. However, the min_rev of usb3_rhub will be changed to 0x00. If USB 3.1 device is connected behind this host controller, the speed of USB 3.1 device just reports 5G speed using lsusb. 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 00 01 08 00 00 00 00 00 40 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20 02 08 10 03 55 53 42 20 01 02 00 00 00 00 00 00 //USB 3.1 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 40 02 08 00 03 55 53 42 20 03 06 00 00 00 00 00 00 //USB 3.0 50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60 02 08 00 02 55 53 42 20 09 0E 19 00 00 00 00 00 //USB 2.0 70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 This patch fixes the issue by only owerwriting the minor revision if it is higher than the existing one. [reword commit message -Mathias] Signed-off-by: YD Tseng <yd_tseng@xxxxxxxxxxxxxx> Signed-off-by: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/usb/host/xhci-mem.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -2128,11 +2128,12 @@ static void xhci_add_in_port(struct xhci { u32 temp, port_offset, port_count; int i; - u8 major_revision; + u8 major_revision, minor_revision; struct xhci_hub *rhub; temp = readl(addr); major_revision = XHCI_EXT_PORT_MAJOR(temp); + minor_revision = XHCI_EXT_PORT_MINOR(temp); if (major_revision == 0x03) { rhub = &xhci->usb3_rhub; @@ -2146,7 +2147,9 @@ static void xhci_add_in_port(struct xhci return; } rhub->maj_rev = XHCI_EXT_PORT_MAJOR(temp); - rhub->min_rev = XHCI_EXT_PORT_MINOR(temp); + + if (rhub->min_rev < minor_revision) + rhub->min_rev = minor_revision; /* Port offset and count in the third dword, see section 7.2 */ temp = readl(addr + 2); Patches currently in stable-queue which might be from yd_tseng@xxxxxxxxxxxxxx are queue-4.11/usb-xhci-fix-usb-3.1-supported-protocol-parsing.patch