This is a note to let you know that I've just added the patch titled serial: sh-sci: Fix late enablement of AUTORTS to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary The filename of the patch is: serial-sh-sci-fix-late-enablement-of-autorts.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable@xxxxxxxxxxxxxxx> know about it. >From 5f76895e4c712b1b5af450cf344389b8c53ac2c2 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx> Date: Tue, 28 Mar 2017 11:13:45 +0200 Subject: serial: sh-sci: Fix late enablement of AUTORTS From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx> commit 5f76895e4c712b1b5af450cf344389b8c53ac2c2 upstream. When changing hardware control flow for a UART with dedicated RTS/CTS pins, the new AUTORTS state is not immediately reflected in the hardware, but only when RTS is raised. However, the serial core does not call .set_mctrl() after .set_termios(), hence AUTORTS may only become effective when the port is closed, and reopened later. Note that this problem does not happen when manually using stty to change CRTSCTS, as AUTORTS will work fine on next open. To fix this, call .set_mctrl() from .set_termios() when dedicated RTS/CTS pins are present, to refresh the AUTORTS or RTS state. This is similar to what other drivers supporting AUTORTS do (e.g. omap-serial). Reported-by: Baumann, Christoph (C.) <cbaumann@xxxxxxxxxxx> Fixes: 33f50ffc253854cf ("serial: sh-sci: Fix support for hardware-assisted RTS/CTS") Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/tty/serial/sh-sci.c | 4 ++++ 1 file changed, 4 insertions(+) --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -2366,6 +2366,10 @@ done: */ udelay(DIV_ROUND_UP(10 * 1000000, baud)); } + if (port->flags & UPF_HARD_FLOW) { + /* Refresh (Auto) RTS */ + sci_set_mctrl(port, port->mctrl); + } #ifdef CONFIG_SERIAL_SH_SCI_DMA /* Patches currently in stable-queue which might be from geert+renesas@xxxxxxxxx are queue-4.9/serial-sh-sci-fix-late-enablement-of-autorts.patch