This is a note to let you know that I've just added the patch titled
dt-bindings: mfd: axp20x: Add "xpowers,master-mode" property for AXP806 PMICs
to the 4.11-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
dt-bindings-mfd-axp20x-add-xpowers-master-mode-property-for-axp806-pmics.patch
and it can be found in the queue-4.11 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
>From 8461cf20d17e0090e9236b73d25b31be4f7fadc5 Mon Sep 17 00:00:00 2001
From: Rask Ingemann Lambertsen <rask@xxxxxxxxxxxx>
Date: Wed, 22 Feb 2017 20:41:02 +0100
Subject: dt-bindings: mfd: axp20x: Add "xpowers,master-mode" property for AXP806 PMICs
From: Rask Ingemann Lambertsen <rask@xxxxxxxxxxxx>
commit 8461cf20d17e0090e9236b73d25b31be4f7fadc5 upstream.
commit b101829a029a ("mfd: axp20x: Fix AXP806 access errors on cold boot")
was intended to fix the case where a board uses an AXP806 in slave mode,
but the boot loader leaves it in master mode for lack of AXP806 support.
But now the driver breaks on boards where the PMIC is operating in master
mode. To let the device tree describe which mode of operation is needed,
this patch introduces a new property "xpowers,master-mode".
Fixes: 204ae2963e10 ("mfd: axp20x: Add bindings for AXP806 PMIC")
Signed-off-by: Rask Ingemann Lambertsen <rask@xxxxxxxxxxxx>
Acked-by: Chen-Yu Tsai <wens@xxxxxxxx>
Signed-off-by: Lee Jones <lee.jones@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
Documentation/devicetree/bindings/mfd/axp20x.txt | 3 +++
1 file changed, 3 insertions(+)
--- a/Documentation/devicetree/bindings/mfd/axp20x.txt
+++ b/Documentation/devicetree/bindings/mfd/axp20x.txt
@@ -28,6 +28,9 @@ Optional properties:
regulator to drive the OTG VBus, rather then as an input pin
which signals whether the board is driving OTG VBus or not.
+- x-powers,master-mode: Boolean (axp806 only). Set this when the PMIC is
+ wired for master mode. The default is slave mode.
+
- <input>-supply: a phandle to the regulator supply node. May be omitted if
inputs are unregulated, such as using the IPSOUT output
from the PMIC.
Patches currently in stable-queue which might be from rask@xxxxxxxxxxxx are
queue-4.11/dt-bindings-mfd-axp20x-add-xpowers-master-mode-property-for-axp806-pmics.patch
queue-4.11/mfd-axp20x-add-support-for-dts-property-xpowers-master-mode.patch