On 06/15/2017 10:02 PM, Sean Paul wrote: > On Thu, Jun 15, 2017 at 01:53:15PM -0400, Sean Paul wrote: >> On Fri, May 05, 2017 at 03:01:41PM -0300, Fabio Estevam wrote: >>> According to the eLCDIF initialization steps listed in the MX6SX >>> Reference Manual the eLCDIF block reset is mandatory. >>> >>> Without performing the eLCDIF reset the display shows garbage content >>> when the kernel boots. >>> >>> In earlier tests this issue has not been observed because the bootloader >>> was previously showing a splash screen and the bootloader display driver >>> does properly implement the eLCDIF reset. >>> >>> Add the eLCDIF reset to the driver, so that it can operate correctly >>> independently of the bootloader. >>> >>> Tested on a imx6sx-sdb board. >>> >>> Cc: <stable@xxxxxxxxxxxxxxx> >>> Signed-off-by: Fabio Estevam <fabio.estevam@xxxxxxx> >> >> Per Marek's request, this has been applied to drm-misc-next >> > > Now applied to misc-fixes per Jani's request :) > Excellent, thanks! -- Best regards, Marek Vasut