This is a note to let you know that I've just added the patch titled net: phy: micrel: add support for KSZ8795 to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary The filename of the patch is: net-phy-micrel-add-support-for-ksz8795.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable@xxxxxxxxxxxxxxx> know about it. >From foo@baz Thu Jun 15 14:38:52 CEST 2017 From: Sean Nyekjaer <sean.nyekjaer@xxxxxxxxx> Date: Fri, 27 Jan 2017 08:46:23 +0100 Subject: net: phy: micrel: add support for KSZ8795 From: Sean Nyekjaer <sean.nyekjaer@xxxxxxxxx> [ Upstream commit 9d162ed69f51cbd9ee5a0c7e82aba7acc96362ff ] This is adds support for the PHYs in the KSZ8795 5port managed switch. It will allow to detect the link between the switch and the soc and uses the same read_status functions as the KSZ8873MLL switch. Signed-off-by: Sean Nyekjaer <sean.nyekjaer@xxxxxxxxx> Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx> Signed-off-by: Sasha Levin <alexander.levin@xxxxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/net/phy/micrel.c | 14 ++++++++++++++ include/linux/micrel_phy.h | 2 ++ 2 files changed, 16 insertions(+) --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -1014,6 +1014,20 @@ static struct phy_driver ksphy_driver[] .get_stats = kszphy_get_stats, .suspend = genphy_suspend, .resume = genphy_resume, +}, { + .phy_id = PHY_ID_KSZ8795, + .phy_id_mask = MICREL_PHY_ID_MASK, + .name = "Micrel KSZ8795", + .features = (SUPPORTED_Pause | SUPPORTED_Asym_Pause), + .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, + .config_init = kszphy_config_init, + .config_aneg = ksz8873mll_config_aneg, + .read_status = ksz8873mll_read_status, + .get_sset_count = kszphy_get_sset_count, + .get_strings = kszphy_get_strings, + .get_stats = kszphy_get_stats, + .suspend = genphy_suspend, + .resume = genphy_resume, } }; module_phy_driver(ksphy_driver); --- a/include/linux/micrel_phy.h +++ b/include/linux/micrel_phy.h @@ -35,6 +35,8 @@ #define PHY_ID_KSZ886X 0x00221430 #define PHY_ID_KSZ8863 0x00221435 +#define PHY_ID_KSZ8795 0x00221550 + /* struct phy_device dev_flags definitions */ #define MICREL_PHY_50MHZ_CLK 0x00000001 #define MICREL_PHY_FXEN 0x00000002 Patches currently in stable-queue which might be from sean.nyekjaer@xxxxxxxxx are queue-4.9/net-phy-micrel-add-support-for-ksz8795.patch