FAILED: patch "[PATCH] drm/i915: Fix rawclk readout for g4x" failed to apply to 4.11-stable tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The patch below does not apply to the 4.11-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@xxxxxxxxxxxxxxx>.

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

>From 82f2b4aca8fd90476fc3fd1786d107163ab17201 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= <ville.syrjala@xxxxxxxxxxxxxxx>
Date: Thu, 4 May 2017 21:15:30 +0300
Subject: [PATCH] drm/i915: Fix rawclk readout for g4x
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Turns out our skills in decoding the CLKCFG register weren't good
enough. On this particular elk the answer we got was 400 MHz when
in reality the clock was running at 266 MHz, which then caused us
to program a bogus AUX clock divider that caused all AUX communication
to fail.

Sadly the docs are now in bit heaven, so the fix will have to be based
on empirical evidence. Using another elk machine I was able to frob
the FSB frequency from the BIOS and see how it affects the CLKCFG
register. The machine seesm to use a frequency of 266 MHz by default,
and fortunately it still boot even with the 50% CPU overclock that
we get when we bump the FSB up to 400 MHz.

It turns out the actual FSB frequency and the register have no real
link whatsoever. The register value is based on some straps or something,
but fortunately those too can be configured from the BIOS on this board,
although it doesn't seem to respect the settings 100%. In the end I was
able to derive the following relationship:

BIOS FSB / strap | CLKCFG
-------------------------
200              | 0x2
266              | 0x0
333              | 0x4
400              | 0x4

So only the 200 and 400 MHz cases actually match how we're currently
decoding that register. But as the comment next to some of the defines
says, we have been just guessing anyway.

So let's fix things up so that at least the 266 MHz case will work
correctly as that is actually the setting used by both the buggy
machine and my test machine.

The fact that 333 and 400 MHz BIOS settings result in the same register
value is a little disappointing, as that means we can't tell them apart.
However, according to the gmch datasheet for both elk and ctg 400 Mhz is
not even a supported FSB frequency, so I'm going to make the assumption
that we should decode it as 333 MHz instead.

Cc: stable@xxxxxxxxxxxxxxx
Cc: Tomi Sarvela <tomi.p.sarvela@xxxxxxxxx>
Reported-by: Tomi Sarvela <tomi.p.sarvela@xxxxxxxxx>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100926
Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
Link: http://patchwork.freedesktop.org/patch/msgid/20170504181530.6908-1-ville.syrjala@xxxxxxxxxxxxxxx
Acked-by: Jani Nikula <jani.nikula@xxxxxxxxx>
Tested-by: Tomi Sarvela <tomi.p.sarvela@xxxxxxxxx>
(cherry picked from commit 6f38123ecaac446312a63523b68df84ceb5a06ed)
Signed-off-by: Jani Nikula <jani.nikula@xxxxxxxxx>

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 11b12f412492..5a7c63e64381 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -3051,10 +3051,14 @@ enum skl_disp_power_wells {
 #define CLKCFG_FSB_667					(3 << 0)	/* hrawclk 166 */
 #define CLKCFG_FSB_800					(2 << 0)	/* hrawclk 200 */
 #define CLKCFG_FSB_1067					(6 << 0)	/* hrawclk 266 */
+#define CLKCFG_FSB_1067_ALT				(0 << 0)	/* hrawclk 266 */
 #define CLKCFG_FSB_1333					(7 << 0)	/* hrawclk 333 */
-/* Note, below two are guess */
-#define CLKCFG_FSB_1600					(4 << 0)	/* hrawclk 400 */
-#define CLKCFG_FSB_1600_ALT				(0 << 0)	/* hrawclk 400 */
+/*
+ * Note that on at least on ELK the below value is reported for both
+ * 333 and 400 MHz BIOS FSB setting, but given that the gmch datasheet
+ * lists only 200/266/333 MHz FSB as supported let's decode it as 333 MHz.
+ */
+#define CLKCFG_FSB_1333_ALT				(4 << 0)	/* hrawclk 333 */
 #define CLKCFG_FSB_MASK					(7 << 0)
 #define CLKCFG_MEM_533					(1 << 4)
 #define CLKCFG_MEM_667					(2 << 4)
diff --git a/drivers/gpu/drm/i915/intel_cdclk.c b/drivers/gpu/drm/i915/intel_cdclk.c
index dd3ad52b7dfe..f29a226e24d8 100644
--- a/drivers/gpu/drm/i915/intel_cdclk.c
+++ b/drivers/gpu/drm/i915/intel_cdclk.c
@@ -1798,13 +1798,11 @@ static int g4x_hrawclk(struct drm_i915_private *dev_priv)
 	case CLKCFG_FSB_800:
 		return 200000;
 	case CLKCFG_FSB_1067:
+	case CLKCFG_FSB_1067_ALT:
 		return 266667;
 	case CLKCFG_FSB_1333:
+	case CLKCFG_FSB_1333_ALT:
 		return 333333;
-	/* these two are just a guess; one of them might be right */
-	case CLKCFG_FSB_1600:
-	case CLKCFG_FSB_1600_ALT:
-		return 400000;
 	default:
 		return 133333;
 	}




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]