From: Johan Hovold <johan@xxxxxxxxxx> commit 4f9785cc99feeb3673993b471f646b4dbaec2cc1 upstream. In case a device is left in "boot-mode" we must not register any port devices in order to avoid a NULL-pointer dereference on open due to missing endpoints. This could be used by a malicious device to trigger an OOPS: Unable to handle kernel NULL pointer dereference at virtual address 00000030 ... [<bf0caa84>] (edge_open [io_ti]) from [<bf0b0118>] (serial_port_activate+0x68/0x98 [usbserial]) [<bf0b0118>] (serial_port_activate [usbserial]) from [<c0470ca4>] (tty_port_open+0x9c/0xe8) [<c0470ca4>] (tty_port_open) from [<bf0b0da0>] (serial_open+0x48/0x6c [usbserial]) [<bf0b0da0>] (serial_open [usbserial]) from [<c0469178>] (tty_open+0xcc/0x5cc) Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Johan Hovold <johan@xxxxxxxxxx> Signed-off-by: Willy Tarreau <w@xxxxxx> --- drivers/usb/serial/io_ti.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index fa0ca9e..e1b3e79 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -1402,7 +1402,7 @@ stayinbootmode: dev_dbg(dev, "%s - STAYING IN BOOT MODE\n", __func__); serial->product_info.TiMode = TI_MODE_BOOT; - return 0; + return 1; } @@ -2451,11 +2451,14 @@ static int edge_startup(struct usb_serial *serial) usb_set_serial_data(serial, edge_serial); status = download_fw(edge_serial); - if (status) { + if (status < 0) { kfree(edge_serial); return status; } + if (status > 0) + return 1; /* bind but do not register any ports */ + return 0; } -- 2.8.0.rc2.1.gbe9624a