Re: [PATCH] USB: option: add support for SIM7100E

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, Jun 04, 2017 at 01:33:10PM +0300, Ilya Ledvich wrote:
> From: Andrey Skvortsov <andrej.skvortzov@xxxxxxxxx>
> 
> $ lsusb:
> Bus 001 Device 101: ID 1e0e:9001 Qualcomm / Option
> 
> $ usb-devices:
> T:  Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=101 Spd=480  MxCh= 0
> D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  2
> P:  Vendor=1e0e ProdID=9001 Rev= 2.32
> S:  Manufacturer=SimTech, Incorporated
> S:  Product=SimTech, Incorporated
> S:  SerialNumber=0123456789ABCDEF
> C:* #Ifs= 7 Cfg#= 1 Atr=80 MxPwr=500mA
> I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
> I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
> I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
> I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
> I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
> I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
> I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
> 
> The last interface (6) is used for Android Composite ADB interface.
> 
> Serial port layout:
> 0: QCDM/DIAG
> 1: NMEA
> 2: AT
> 3: AT/PPP
> 4: audio
> 
> Signed-off-by: Andrey Skvortsov <andrej.skvortzov@xxxxxxxxx>
> Cc: stable <stable@xxxxxxxxxxxxxxx>
> Signed-off-by: Johan Hovold <johan@xxxxxxxxxx>

I'm assuming you did not intend to CC neither Andrey, stable or me on
this old patch (which is already upstream).

Take a look at git-send-email's --suppress-cc switch.

Johan



[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]