Re: [Intel-gfx] [PATCH 1/7] drm/i915: Fix deadlock witha the pipe A quirk during resume

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 01 Jun 2017, Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx> wrote:
> On Thu, Jun 01, 2017 at 05:47:45PM +0300, Jani Nikula wrote:
>> On Thu, 01 Jun 2017, ville.syrjala@xxxxxxxxxxxxxxx wrote:
>> > From: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
>> >
>> > Pass down the correct acquire context to the pipe A quirk load detect
>> > hack during display resume. Avoids deadlocking the entire thing.
>> 
>> Have we seen this in the wild? References?
>
> My 830.

Okay, just checking if the cc: stable was really warranted in this one
and the next patch. Carry on! :)

BR,
Jani.

>
>> 
>> BR,
>> Jani.
>> 
>> >
>> > Cc: stable@xxxxxxxxxxxxxxx
>> > Cc: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
>> > Fixes: e2c8b8701e2d ("drm/i915: Use atomic helpers for suspend, v2.")
>> > Signed-off-by: Ville Syrjälä <ville.syrjala@xxxxxxxxxxxxxxx>
>> > ---
>> >  drivers/gpu/drm/i915/intel_display.c | 21 ++++++++++++---------
>> >  1 file changed, 12 insertions(+), 9 deletions(-)
>> >
>> > diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
>> > index ed41b59ee8e3..2f76a63efe8c 100644
>> > --- a/drivers/gpu/drm/i915/intel_display.c
>> > +++ b/drivers/gpu/drm/i915/intel_display.c
>> > @@ -120,7 +120,8 @@ static void intel_crtc_init_scalers(struct intel_crtc *crtc,
>> >  static void skylake_pfit_enable(struct intel_crtc *crtc);
>> >  static void ironlake_pfit_disable(struct intel_crtc *crtc, bool force);
>> >  static void ironlake_pfit_enable(struct intel_crtc *crtc);
>> > -static void intel_modeset_setup_hw_state(struct drm_device *dev);
>> > +static void intel_modeset_setup_hw_state(struct drm_device *dev,
>> > +					 struct drm_modeset_acquire_ctx *ctx);
>> >  static void intel_pre_disable_primary_noatomic(struct drm_crtc *crtc);
>> >  
>> >  struct intel_limit {
>> > @@ -3461,7 +3462,7 @@ __intel_display_resume(struct drm_device *dev,
>> >  	struct drm_crtc *crtc;
>> >  	int i, ret;
>> >  
>> > -	intel_modeset_setup_hw_state(dev);
>> > +	intel_modeset_setup_hw_state(dev, ctx);
>> >  	i915_redisable_vga(to_i915(dev));
>> >  
>> >  	if (!state)
>> > @@ -15094,7 +15095,7 @@ int intel_modeset_init(struct drm_device *dev)
>> >  	intel_setup_outputs(dev_priv);
>> >  
>> >  	drm_modeset_lock_all(dev);
>> > -	intel_modeset_setup_hw_state(dev);
>> > +	intel_modeset_setup_hw_state(dev, dev->mode_config.acquire_ctx);
>> >  	drm_modeset_unlock_all(dev);
>> >  
>> >  	for_each_intel_crtc(dev, crtc) {
>> > @@ -15131,13 +15132,13 @@ int intel_modeset_init(struct drm_device *dev)
>> >  	return 0;
>> >  }
>> >  
>> > -static void intel_enable_pipe_a(struct drm_device *dev)
>> > +static void intel_enable_pipe_a(struct drm_device *dev,
>> > +				struct drm_modeset_acquire_ctx *ctx)
>> >  {
>> >  	struct intel_connector *connector;
>> >  	struct drm_connector_list_iter conn_iter;
>> >  	struct drm_connector *crt = NULL;
>> >  	struct intel_load_detect_pipe load_detect_temp;
>> > -	struct drm_modeset_acquire_ctx *ctx = dev->mode_config.acquire_ctx;
>> >  	int ret;
>> >  
>> >  	/* We can't just switch on the pipe A, we need to set things up with a
>> > @@ -15209,7 +15210,8 @@ static bool has_pch_trancoder(struct drm_i915_private *dev_priv,
>> >  		(HAS_PCH_LPT_H(dev_priv) && pch_transcoder == TRANSCODER_A);
>> >  }
>> >  
>> > -static void intel_sanitize_crtc(struct intel_crtc *crtc)
>> > +static void intel_sanitize_crtc(struct intel_crtc *crtc,
>> > +				struct drm_modeset_acquire_ctx *ctx)
>> >  {
>> >  	struct drm_device *dev = crtc->base.dev;
>> >  	struct drm_i915_private *dev_priv = to_i915(dev);
>> > @@ -15265,7 +15267,7 @@ static void intel_sanitize_crtc(struct intel_crtc *crtc)
>> >  		 * resume. Force-enable the pipe to fix this, the update_dpms
>> >  		 * call below we restore the pipe to the right state, but leave
>> >  		 * the required bits on. */
>> > -		intel_enable_pipe_a(dev);
>> > +		intel_enable_pipe_a(dev, ctx);
>> >  	}
>> >  
>> >  	/* Adjust the state of the output pipe according to whether we
>> > @@ -15568,7 +15570,8 @@ get_encoder_power_domains(struct drm_i915_private *dev_priv)
>> >   * and sanitizes it to the current state
>> >   */
>> >  static void
>> > -intel_modeset_setup_hw_state(struct drm_device *dev)
>> > +intel_modeset_setup_hw_state(struct drm_device *dev,
>> > +			     struct drm_modeset_acquire_ctx *ctx)
>> >  {
>> >  	struct drm_i915_private *dev_priv = to_i915(dev);
>> >  	enum pipe pipe;
>> > @@ -15588,7 +15591,7 @@ intel_modeset_setup_hw_state(struct drm_device *dev)
>> >  	for_each_pipe(dev_priv, pipe) {
>> >  		crtc = intel_get_crtc_for_pipe(dev_priv, pipe);
>> >  
>> > -		intel_sanitize_crtc(crtc);
>> > +		intel_sanitize_crtc(crtc, ctx);
>> >  		intel_dump_pipe_config(crtc, crtc->config,
>> >  				       "[setup_hw_state]");
>> >  	}
>> 
>> -- 
>> Jani Nikula, Intel Open Source Technology Center

-- 
Jani Nikula, Intel Open Source Technology Center



[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]