3.2.89-rc1 review patch. If anyone has any objections, please let me know. ------------------ From: Ian Abbott <abbotti@xxxxxxxxx> commit 1c9c858e2ff8ae8024a3d75d2ed080063af43754 upstream. The MKS Instruments SCOM-0800 and SCOM-0801 cards (originally by Tenta Technologies) are 3U CompactPCI serial cards with 4 and 8 serial ports, respectively. The first 4 ports are implemented by an OX16PCI954 chip, and the second 4 ports are implemented by an OX16C954 chip on a local bus, bridged by the second PCI function of the OX16PCI954. The ports are jumper-selectable as RS-232 and RS-422/485, and the UARTs use a non-standard oscillator frequency of 20 MHz (base_baud = 1250000). Signed-off-by: Ian Abbott <abbotti@xxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> [bwh: Backported to 3.2: adjust filename] Signed-off-by: Ben Hutchings <ben@xxxxxxxxxxxxxxx> --- drivers/tty/serial/8250_pci.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) --- a/drivers/tty/serial/8250_pci.c +++ b/drivers/tty/serial/8250_pci.c @@ -1768,6 +1768,8 @@ enum pci_board_num_t { pbn_b0_4_1152000, + pbn_b0_4_1250000, + pbn_b0_2_1843200, pbn_b0_4_1843200, @@ -1964,6 +1966,13 @@ static struct pciserial_board pci_boards .uart_offset = 8, }, + [pbn_b0_4_1250000] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 1250000, + .uart_offset = 8, + }, + [pbn_b0_2_1843200] = { .flags = FL_BASE0, .num_ports = 2, @@ -4162,6 +4171,10 @@ static struct pci_device_id serial_pci_t PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_brcm_trumanage }, + /* MKS Tenta SCOM-080x serial cards */ + { PCI_DEVICE(0x1601, 0x0800), .driver_data = pbn_b0_4_1250000 }, + { PCI_DEVICE(0x1601, 0xa801), .driver_data = pbn_b0_4_1250000 }, + /* * These entries match devices with class COMMUNICATION_SERIAL, * COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL