3.16.44-rc1 review patch. If anyone has any objections, please let me know.
------------------
From: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
commit 1b211d48abaa0e12e6e6177c0316ff55d11fdfce upstream.
Datasheet of each device (lps331ap, lps25h, lps001wp, lps22hb) says that
the pressure and temperature data is a 2's complement.
I'm sending this the slow way, as negative pressures on these are pretty
unusual and the nature of the fixing of multiple device introduction patches
will make it hard to apply to older kernels - Jonathan.
Fixes: 217494e5b780 ("iio:pressure: Add STMicroelectronics pressures driver")
Fixes: 2f5effcbd097 ("iio: pressure-core: st: Expand and rename LPS331AP's channel descriptor")
Fixes: 7885a8ce6800 ("iio: pressure: st: Add support for new LPS001WP pressure sensor")
Fixes: e039e2f5b4da ("iio:st_pressure:initial lps22hb sensor support")
Signed-off-by: Marcin Niestroj <m.niestroj@xxxxxxxxxxxxxxxx>
Reviewed-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
Signed-off-by: Jonathan Cameron <jic23@xxxxxxxxxx>
[bwh: Backported to 3.16: drop change in st_press_lps22hb_channels]
Signed-off-by: Ben Hutchings <ben@xxxxxxxxxxxxxxx>
---
--- a/drivers/iio/pressure/st_pressure_core.c
+++ b/drivers/iio/pressure/st_pressure_core.c
@@ -116,7 +116,7 @@ static const struct iio_chan_spec st_pre
.address = ST_PRESS_1_OUT_XL_ADDR,
.scan_index = ST_SENSORS_SCAN_X,
.scan_type = {
- .sign = 'u',
+ .sign = 's',
.realbits = 24,
.storagebits = 24,
.endianness = IIO_LE,
@@ -131,7 +131,7 @@ static const struct iio_chan_spec st_pre
.address = ST_TEMP_1_OUT_L_ADDR,
.scan_index = -1,
.scan_type = {
- .sign = 'u',
+ .sign = 's',
.realbits = 16,
.storagebits = 16,
.endianness = IIO_LE,
@@ -152,7 +152,7 @@ static const struct iio_chan_spec st_pre
.address = ST_PRESS_LPS001WP_OUT_L_ADDR,
.scan_index = ST_SENSORS_SCAN_X,
.scan_type = {
- .sign = 'u',
+ .sign = 's',
.realbits = 16,
.storagebits = 16,
.endianness = IIO_LE,
@@ -168,7 +168,7 @@ static const struct iio_chan_spec st_pre
.address = ST_TEMP_LPS001WP_OUT_L_ADDR,
.scan_index = -1,
.scan_type = {
- .sign = 'u',
+ .sign = 's',
.realbits = 16,
.storagebits = 16,
.endianness = IIO_LE,