4.11-stable review patch. If anyone has any objections, please let me know. ------------------ From: Roger Quadros <rogerq@xxxxxx> commit 2d283ede59869159f4bb84ae689258c5caffce54 upstream. commit c9711ec5250b ("mtd: nand: omap: Clean up device tree support") caused the parent device name to be changed from "omap2-nand.0" to "<base address>.nand" (e.g. 30000000.nand on omap3 platforms). This caused mtd->name to be changed as well. This breaks partition creation via mtdparts passed by u-boot as it uses "omap2-nand.0" for the mtd-id. Fix this by explicitly setting the mtd->name to "omap2-nand.<CS number>" if it isn't already set by nand_set_flash_node(). CS number is the NAND controller instance ID. Fixes: c9711ec5250b ("mtd: nand: omap: Clean up device tree support") Reported-by: Leto Enrico <enrico.leto@xxxxxxxxxxx> Reported-by: Adam Ford <aford173@xxxxxxxxx> Suggested-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx> Tested-by: Adam Ford <aford173@xxxxxxxxx> Signed-off-by: Roger Quadros <rogerq@xxxxxx> Signed-off-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/mtd/nand/omap2.c | 9 +++++++++ 1 file changed, 9 insertions(+) --- a/drivers/mtd/nand/omap2.c +++ b/drivers/mtd/nand/omap2.c @@ -1856,6 +1856,15 @@ static int omap_nand_probe(struct platfo nand_chip->ecc.priv = NULL; nand_set_flash_node(nand_chip, dev->of_node); + if (!mtd->name) { + mtd->name = devm_kasprintf(&pdev->dev, GFP_KERNEL, + "omap2-nand.%d", info->gpmc_cs); + if (!mtd->name) { + dev_err(&pdev->dev, "Failed to set MTD name\n"); + return -ENOMEM; + } + } + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); nand_chip->IO_ADDR_R = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(nand_chip->IO_ADDR_R))