4.9-stable review patch. If anyone has any objections, please let me know. ------------------ From: Leonard Crestez <leonard.crestez@xxxxxxx> commit d8581c7c8be172dac156a19d261f988a72ce596f upstream. The board file for imx6sx-sdb overrides cpufreq operating points to use higher voltages. This is done because the board has a shared rail for VDD_ARM_IN and VDD_SOC_IN and when using LDO bypass the shared voltage needs to be a value suitable for both ARM and SOC. This only applies to LDO bypass mode, a feature not present in upstream. When LDOs are enabled the effect is to use higher voltages than necessary for no good reason. Setting these higher voltages can make some boards fail to boot with ugly semi-random crashes reminiscent of memory corruption. These failures only happen on board rev. C, rev. B is reported to still work. Signed-off-by: Leonard Crestez <leonard.crestez@xxxxxxx> Fixes: 54183bd7f766 ("ARM: imx6sx-sdb: add revb board and make it default") Signed-off-by: Shawn Guo <shawnguo@xxxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- arch/arm/boot/dts/imx6sx-sdb.dts | 17 ----------------- 1 file changed, 17 deletions(-) --- a/arch/arm/boot/dts/imx6sx-sdb.dts +++ b/arch/arm/boot/dts/imx6sx-sdb.dts @@ -12,23 +12,6 @@ model = "Freescale i.MX6 SoloX SDB RevB Board"; }; -&cpu0 { - operating-points = < - /* kHz uV */ - 996000 1250000 - 792000 1175000 - 396000 1175000 - 198000 1175000 - >; - fsl,soc-operating-points = < - /* ARM kHz SOC uV */ - 996000 1250000 - 792000 1175000 - 396000 1175000 - 198000 1175000 - >; -}; - &i2c1 { clock-frequency = <100000>; pinctrl-names = "default";