The patch below does not apply to the 4.4-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@xxxxxxxxxxxxxxx>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
>From d8581c7c8be172dac156a19d261f988a72ce596f Mon Sep 17 00:00:00 2001
From: Leonard Crestez <leonard.crestez@xxxxxxx>
Date: Fri, 5 May 2017 14:00:17 +0300
Subject: [PATCH] ARM: dts: imx6sx-sdb: Remove OPP override
The board file for imx6sx-sdb overrides cpufreq operating points to use
higher voltages. This is done because the board has a shared rail for
VDD_ARM_IN and VDD_SOC_IN and when using LDO bypass the shared voltage
needs to be a value suitable for both ARM and SOC.
This only applies to LDO bypass mode, a feature not present in upstream.
When LDOs are enabled the effect is to use higher voltages than necessary
for no good reason.
Setting these higher voltages can make some boards fail to boot with ugly
semi-random crashes reminiscent of memory corruption. These failures only
happen on board rev. C, rev. B is reported to still work.
Signed-off-by: Leonard Crestez <leonard.crestez@xxxxxxx>
Fixes: 54183bd7f766 ("ARM: imx6sx-sdb: add revb board and make it default")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Shawn Guo <shawnguo@xxxxxxxxxx>
diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts
index 5bb8fd57e7f5..d71da30c9cff 100644
--- a/arch/arm/boot/dts/imx6sx-sdb.dts
+++ b/arch/arm/boot/dts/imx6sx-sdb.dts
@@ -12,23 +12,6 @@
model = "Freescale i.MX6 SoloX SDB RevB Board";
};
-&cpu0 {
- operating-points = <
- /* kHz uV */
- 996000 1250000
- 792000 1175000
- 396000 1175000
- 198000 1175000
- >;
- fsl,soc-operating-points = <
- /* ARM kHz SOC uV */
- 996000 1250000
- 792000 1175000
- 396000 1175000
- 198000 1175000
- >;
-};
-
&i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default";