This is a note to let you know that I've just added the patch titled ARM: tegra: paz00: Mark panel regulator as enabled on boot to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary The filename of the patch is: arm-tegra-paz00-mark-panel-regulator-as-enabled-on-boot.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable@xxxxxxxxxxxxxxx> know about it. >From 0c18927f51f4d390abdcf385bff5f995407ee732 Mon Sep 17 00:00:00 2001 From: Marc Dietrich <marvin24@xxxxxx> Date: Fri, 9 Dec 2016 10:20:38 +0100 Subject: ARM: tegra: paz00: Mark panel regulator as enabled on boot From: Marc Dietrich <marvin24@xxxxxx> commit 0c18927f51f4d390abdcf385bff5f995407ee732 upstream. Current U-Boot enables the display already. Marking the regulator as enabled on boot fixes sporadic panel initialization failures. Signed-off-by: Marc Dietrich <marvin24@xxxxxx> Tested-by: Misha Komarovskiy <zombah@xxxxxxxxx> Signed-off-by: Thierry Reding <treding@xxxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- arch/arm/boot/dts/tegra20-paz00.dts | 1 + 1 file changed, 1 insertion(+) --- a/arch/arm/boot/dts/tegra20-paz00.dts +++ b/arch/arm/boot/dts/tegra20-paz00.dts @@ -569,6 +569,7 @@ regulator-name = "+3VS,vdd_pnl"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + regulator-boot-on; gpio = <&gpio TEGRA_GPIO(A, 4) GPIO_ACTIVE_HIGH>; enable-active-high; }; Patches currently in stable-queue which might be from marvin24@xxxxxx are queue-4.9/arm-tegra-paz00-mark-panel-regulator-as-enabled-on-boot.patch