The third argument of devm_request_threaded_irq() is the primary handler. It is called in hardirq context and checks whether the interrupt is relevant to the device. If the primary handler returns IRQ_WAKE_THREAD, the secondary handler (a.k.a. handler thread) is scheduled to run in process context. bcm_iproc_adc.c uses the secondary handler as the primary one and the other way around. So this patch fixes the same, along with re-naming the secondary handler and primary handler names properly. Tested on the BCM9583XX iProc SoC based boards. Fixes: 4324c97ecedc ("iio: Add driver for Broadcom iproc-static-adc") Reported-by: Pavel Roskin <plroskin@xxxxxxxxx> Signed-off-by: Raveendra Padasalagi <raveendra.padasalagi@xxxxxxxxxxxx> Cc: stable@xxxxxxxxxxxxxxx --- Changes in v2: - Added Cc tag in the Signed-off area to send the patch to stable kernel - Fixes tag corrected with proper formatting drivers/iio/adc/bcm_iproc_adc.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/iio/adc/bcm_iproc_adc.c b/drivers/iio/adc/bcm_iproc_adc.c index 21d38c8..7f4f9c4 100644 --- a/drivers/iio/adc/bcm_iproc_adc.c +++ b/drivers/iio/adc/bcm_iproc_adc.c @@ -143,7 +143,7 @@ static void iproc_adc_reg_dump(struct iio_dev *indio_dev) iproc_adc_dbg_reg(dev, adc_priv, IPROC_SOFT_BYPASS_DATA); } -static irqreturn_t iproc_adc_interrupt_handler(int irq, void *data) +static irqreturn_t iproc_adc_interrupt_thread(int irq, void *data) { u32 channel_intr_status; u32 intr_status; @@ -167,7 +167,7 @@ static irqreturn_t iproc_adc_interrupt_handler(int irq, void *data) return IRQ_NONE; } -static irqreturn_t iproc_adc_interrupt_thread(int irq, void *data) +static irqreturn_t iproc_adc_interrupt_handler(int irq, void *data) { irqreturn_t retval = IRQ_NONE; struct iproc_adc_priv *adc_priv; @@ -181,7 +181,7 @@ static irqreturn_t iproc_adc_interrupt_thread(int irq, void *data) adc_priv = iio_priv(indio_dev); regmap_read(adc_priv->regmap, IPROC_INTERRUPT_STATUS, &intr_status); - dev_dbg(&indio_dev->dev, "iproc_adc_interrupt_thread(),INTRPT_STS:%x\n", + dev_dbg(&indio_dev->dev, "iproc_adc_interrupt_handler(),INTRPT_STS:%x\n", intr_status); intr_channels = (intr_status & IPROC_ADC_INTR_MASK) >> IPROC_ADC_INTR; @@ -566,8 +566,8 @@ static int iproc_adc_probe(struct platform_device *pdev) } ret = devm_request_threaded_irq(&pdev->dev, adc_priv->irqno, - iproc_adc_interrupt_thread, iproc_adc_interrupt_handler, + iproc_adc_interrupt_thread, IRQF_SHARED, "iproc-adc", indio_dev); if (ret) { dev_err(&pdev->dev, "request_irq error %d\n", ret); -- 1.9.1