4.4-stable review patch. If anyone has any objections, please let me know. ------------------ From: Stephen Boyd <stephen.boyd@xxxxxxxxxx> commit a89b94b53371bbfa582787c2fa3378000ea4263d upstream. We're currently emulating the vbus and id interrupts in the OTGSC read API, but we also need to make sure that if we're handling the events with extcon that we don't enable the interrupts for those events in the hardware. Therefore, properly emulate this register if we're using extcon, but don't enable the interrupts. This allows me to get my cable connect/disconnect working properly without getting spurious interrupts on my device that uses an extcon for these two events. Acked-by: Peter Chen <peter.chen@xxxxxxx> Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> Cc: "Ivan T. Ivanov" <iivanov.xz@xxxxxxxxx> Fixes: 3ecb3e09b042 ("usb: chipidea: Use extcon framework for VBUS and ID detect") Signed-off-by: Stephen Boyd <stephen.boyd@xxxxxxxxxx> Signed-off-by: Peter Chen <peter.chen@xxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/usb/chipidea/otg.c | 46 ++++++++++++++++++++++++++++++++++++++----- include/linux/usb/chipidea.h | 2 + 2 files changed, 43 insertions(+), 5 deletions(-) --- a/drivers/usb/chipidea/otg.c +++ b/drivers/usb/chipidea/otg.c @@ -44,12 +44,15 @@ u32 hw_read_otgsc(struct ci_hdrc *ci, u3 else val &= ~OTGSC_BSVIS; - cable->changed = false; - if (cable->state) val |= OTGSC_BSV; else val &= ~OTGSC_BSV; + + if (cable->enabled) + val |= OTGSC_BSVIE; + else + val &= ~OTGSC_BSVIE; } cable = &ci->platdata->id_extcon; @@ -59,15 +62,18 @@ u32 hw_read_otgsc(struct ci_hdrc *ci, u3 else val &= ~OTGSC_IDIS; - cable->changed = false; - if (cable->state) val |= OTGSC_ID; else val &= ~OTGSC_ID; + + if (cable->enabled) + val |= OTGSC_IDIE; + else + val &= ~OTGSC_IDIE; } - return val; + return val & mask; } /** @@ -77,6 +83,36 @@ u32 hw_read_otgsc(struct ci_hdrc *ci, u3 */ void hw_write_otgsc(struct ci_hdrc *ci, u32 mask, u32 data) { + struct ci_hdrc_cable *cable; + + cable = &ci->platdata->vbus_extcon; + if (!IS_ERR(cable->edev)) { + if (data & mask & OTGSC_BSVIS) + cable->changed = false; + + /* Don't enable vbus interrupt if using external notifier */ + if (data & mask & OTGSC_BSVIE) { + cable->enabled = true; + data &= ~OTGSC_BSVIE; + } else if (mask & OTGSC_BSVIE) { + cable->enabled = false; + } + } + + cable = &ci->platdata->id_extcon; + if (!IS_ERR(cable->edev)) { + if (data & mask & OTGSC_IDIS) + cable->changed = false; + + /* Don't enable id interrupt if using external notifier */ + if (data & mask & OTGSC_IDIE) { + cable->enabled = true; + data &= ~OTGSC_IDIE; + } else if (mask & OTGSC_IDIE) { + cable->enabled = false; + } + } + hw_write(ci, OP_OTGSC, mask | OTGSC_INT_STATUS_BITS, data); } --- a/include/linux/usb/chipidea.h +++ b/include/linux/usb/chipidea.h @@ -14,6 +14,7 @@ struct ci_hdrc; * struct ci_hdrc_cable - structure for external connector cable state tracking * @state: current state of the line * @changed: set to true when extcon event happen + * @enabled: set to true if we've enabled the vbus or id interrupt * @edev: device which generate events * @ci: driver state of the chipidea device * @nb: hold event notification callback @@ -22,6 +23,7 @@ struct ci_hdrc; struct ci_hdrc_cable { bool state; bool changed; + bool enabled; struct extcon_dev *edev; struct ci_hdrc *ci; struct notifier_block nb;