Re: [PATCH] net: ethernet: stmmac: properly set PS bit in MII configurations during reset

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello,

On Wed, 10 May 2017 09:03:12 +0200, Giuseppe CAVALLARO wrote:

> > Please, read again my patch and the description of the problem that I
> > have sent. But basically, any solution that does not allow to set the
> > PS bit between asserting the DMA reset bit and polling for it to clear
> > will not work for MII PHYs.  
> 
> yes your point was clear to me, I was just wondering if we could find an 
> easier way
> to solve it w/o changing the API, adding  the set_ps and propagating the 
> "interface"
> inside the DMA reset.
> 
> Maybe this could be fixed in the glue-logic in some way. Let me know 
> what do you think.

Well, it's more up to you to tell me how you would like this be solved.
We figured out what the problem was, but I don't know well enough the
architecture of the driver to decide how the solution to this problem
should be designed. I made an initial simple proposal to show what is
needed, but I'm definitely open to suggestions.

Best regards,

Thomas
-- 
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com



[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]