The current implementation of interrupt coalescing doesn't work, because it doesn't configure the coalescing timer, which is needed to make sure we get an interrupt at some point. As a fix for stable, we simply remove the interrupt coalescing functionality. It will be re-introduced properly in a future commit. Fixes: 19a340b1a820 ("dmaengine: mv_xor_v2: new driver") Cc: <stable@xxxxxxxxxxxxxxx> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx> --- drivers/dma/mv_xor_v2.c | 25 ------------------------- 1 file changed, 25 deletions(-) diff --git a/drivers/dma/mv_xor_v2.c b/drivers/dma/mv_xor_v2.c index 4684ece..b133fe2 100644 --- a/drivers/dma/mv_xor_v2.c +++ b/drivers/dma/mv_xor_v2.c @@ -246,22 +246,6 @@ static int mv_xor_v2_set_desc_size(struct mv_xor_v2_device *xor_dev) return MV_XOR_V2_EXT_DESC_SIZE; } -/* - * Set the IMSG threshold - */ -static inline -void mv_xor_v2_set_imsg_thrd(struct mv_xor_v2_device *xor_dev, int thrd_val) -{ - u32 reg; - - reg = readl(xor_dev->dma_base + MV_XOR_V2_DMA_IMSG_THRD_OFF); - - reg &= (~MV_XOR_V2_DMA_IMSG_THRD_MASK << MV_XOR_V2_DMA_IMSG_THRD_SHIFT); - reg |= (thrd_val << MV_XOR_V2_DMA_IMSG_THRD_SHIFT); - - writel(reg, xor_dev->dma_base + MV_XOR_V2_DMA_IMSG_THRD_OFF); -} - static irqreturn_t mv_xor_v2_interrupt_handler(int irq, void *data) { struct mv_xor_v2_device *xor_dev = data; @@ -277,12 +261,6 @@ static irqreturn_t mv_xor_v2_interrupt_handler(int irq, void *data) if (!ndescs) return IRQ_NONE; - /* - * Update IMSG threshold, to disable new IMSG interrupts until - * end of the tasklet - */ - mv_xor_v2_set_imsg_thrd(xor_dev, MV_XOR_V2_DESC_NUM); - /* schedule a tasklet to handle descriptors callbacks */ tasklet_schedule(&xor_dev->irq_tasklet); @@ -607,9 +585,6 @@ static void mv_xor_v2_tasklet(unsigned long data) /* free the descriptores */ mv_xor_v2_free_desc_from_desq(xor_dev, num_of_pending); } - - /* Update IMSG threshold, to enable new IMSG interrupts */ - mv_xor_v2_set_imsg_thrd(xor_dev, 0); } /* -- 2.7.4