From: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
If we get an error event really early in the driver setup sequence,
which gen3 is especially prone to with various display GTT faults we
Oops. So try to avoid this.
Additionally with Haswell the transcoders are a separate bank of
registers from the pipes (4 transcoders, 3 pipes). In event of an
error, we want to be sure we have a complete and accurate picture of
the machine state, so record all the transcoders in addition to all
the active pipes.
This regression has been introduced in
commit 702e7a56af3780d8b3a717f698209bef44187bb0
Author: Paulo Zanoni <paulo.r.zanoni@xxxxxxxxx>
Date: Tue Oct 23 18:29:59 2012 -0200
drm/i915: convert PIPECONF to use transcoder instead of pipe
Based on the patch "drm/i915: Dump all transcoder registers on error"
from Chris Wilson:
v2: Rebase so that we don't try to be clever and try to figure out the
cpu transcoder from hw state. That exercise should be done when we
analyze the error state offline.
The actual bugfix is to not call intel_pipe_to_cpu_transcoder in the
error state capture code in case the pipes aren't fully set up yet.
v3: Simplifiy the err->num_transcoders computation a bit. While at it
make the error capture stuff save on systems without a display block.
v4: Fix fail, spotted by Jani.
v5: Completely new commit message, cc: stable.
Cc: Paulo Zanoni <paulo.r.zanoni@xxxxxxxxx>
Cc: Damien Lespiau <damien.lespiau@xxxxxxxxx>
Cc: Jani Nikula <jani.nikula@xxxxxxxxx>
Cc: Chris Wilson <chris@xxxxxxxxxxxxxxxxxx>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=60021
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Daniel Vetter <daniel.vetter@xxxxxxxx>
---
drivers/gpu/drm/i915/intel_display.c | 86 ++++++++++++++++++++++++------------
1 file changed, 57 insertions(+), 29 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 4127ad2..0b11405 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -10380,6 +10380,8 @@ struct intel_display_error_state {
u32 power_well_driver;
+ int num_transcoders;
+
struct intel_cursor_error_state {
u32 control;
u32 position;
@@ -10388,16 +10390,7 @@ struct intel_display_error_state {
} cursor[I915_MAX_PIPES];
struct intel_pipe_error_state {
- enum transcoder cpu_transcoder;
- u32 conf;
u32 source;
-
- u32 htotal;
- u32 hblank;
- u32 hsync;
- u32 vtotal;
- u32 vblank;
- u32 vsync;
} pipe[I915_MAX_PIPES];
struct intel_plane_error_state {
@@ -10409,6 +10402,19 @@ struct intel_display_error_state {
u32 surface;
u32 tile_offset;
} plane[I915_MAX_PIPES];
+
+ struct intel_transcoder_error_state {
+ enum transcoder cpu_transcoder;
+
+ u32 conf;
+
+ u32 htotal;
+ u32 hblank;
+ u32 hsync;
+ u32 vtotal;
+ u32 vblank;
+ u32 vsync;
+ } transcoder[4];
};
struct intel_display_error_state *
@@ -10416,9 +10422,17 @@ intel_display_capture_error_state(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
struct intel_display_error_state *error;
- enum transcoder cpu_transcoder;
+ int transcoders[] = {
+ TRANSCODER_A,
+ TRANSCODER_B,
+ TRANSCODER_C,
+ TRANSCODER_EDP,
+ };
int i;
+ if (INTEL_INFO(dev)->num_pipes == 0)
+ return NULL;
+
error = kmalloc(sizeof(*error), GFP_ATOMIC);
if (error == NULL)
return NULL;
@@ -10427,9 +10441,6 @@ intel_display_capture_error_state(struct drm_device *dev)
error->power_well_driver = I915_READ(HSW_PWR_WELL_DRIVER);
for_each_pipe(i) {
- cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv, i);
- error->pipe[i].cpu_transcoder = cpu_transcoder;
-
if (INTEL_INFO(dev)->gen <= 6 || IS_VALLEYVIEW(dev)) {
error->cursor[i].control = I915_READ(CURCNTR(i));
error->cursor[i].position = I915_READ(CURPOS(i));
@@ -10453,14 +10464,25 @@ intel_display_capture_error_state(struct drm_device *dev)
error->plane[i].tile_offset = I915_READ(DSPTILEOFF(i));
}
- error->pipe[i].conf = I915_READ(PIPECONF(cpu_transcoder));
error->pipe[i].source = I915_READ(PIPESRC(i));
- error->pipe[i].htotal = I915_READ(HTOTAL(cpu_transcoder));
- error->pipe[i].hblank = I915_READ(HBLANK(cpu_transcoder));
- error->pipe[i].hsync = I915_READ(HSYNC(cpu_transcoder));
- error->pipe[i].vtotal = I915_READ(VTOTAL(cpu_transcoder));
- error->pipe[i].vblank = I915_READ(VBLANK(cpu_transcoder));
- error->pipe[i].vsync = I915_READ(VSYNC(cpu_transcoder));
+ }
+
+ error->num_transcoders = INTEL_INFO(dev)->num_pipes;
+ if (HAS_DDI(dev_priv->dev))
+ error->num_transcoders++; /* Account for eDP. */
+
+ for (i = 0; i < error->num_transcoders; i++) {
+ enum transcoder cpu_transcoder = transcoders[i];
+
+ error->transcoder[i].cpu_transcoder = cpu_transcoder;
+
+ error->transcoder[i].conf = I915_READ(PIPECONF(cpu_transcoder));
+ error->transcoder[i].htotal = I915_READ(HTOTAL(cpu_transcoder));
+ error->transcoder[i].hblank = I915_READ(HBLANK(cpu_transcoder));
+ error->transcoder[i].hsync = I915_READ(HSYNC(cpu_transcoder));
+ error->transcoder[i].vtotal = I915_READ(VTOTAL(cpu_transcoder));
+ error->transcoder[i].vblank = I915_READ(VBLANK(cpu_transcoder));
+ error->transcoder[i].vsync = I915_READ(VSYNC(cpu_transcoder));
}
/* In the code above we read the registers without checking if the power
@@ -10481,22 +10503,16 @@ intel_display_print_error_state(struct drm_i915_error_state_buf *m,
{
int i;
+ if (!error)
+ return;
+
err_printf(m, "Num Pipes: %d\n", INTEL_INFO(dev)->num_pipes);
if (HAS_POWER_WELL(dev))
err_printf(m, "PWR_WELL_CTL2: %08x\n",
error->power_well_driver);
for_each_pipe(i) {
err_printf(m, "Pipe [%d]:\n", i);
- err_printf(m, " CPU transcoder: %c\n",
- transcoder_name(error->pipe[i].cpu_transcoder));
- err_printf(m, " CONF: %08x\n", error->pipe[i].conf);
err_printf(m, " SRC: %08x\n", error->pipe[i].source);
- err_printf(m, " HTOTAL: %08x\n", error->pipe[i].htotal);
- err_printf(m, " HBLANK: %08x\n", error->pipe[i].hblank);
- err_printf(m, " HSYNC: %08x\n", error->pipe[i].hsync);
- err_printf(m, " VTOTAL: %08x\n", error->pipe[i].vtotal);
- err_printf(m, " VBLANK: %08x\n", error->pipe[i].vblank);
- err_printf(m, " VSYNC: %08x\n", error->pipe[i].vsync);
err_printf(m, "Plane [%d]:\n", i);
err_printf(m, " CNTR: %08x\n", error->plane[i].control);
@@ -10517,4 +10533,16 @@ intel_display_print_error_state(struct drm_i915_error_state_buf *m,
err_printf(m, " POS: %08x\n", error->cursor[i].position);
err_printf(m, " BASE: %08x\n", error->cursor[i].base);
}
+
+ for (i = 0; i < error->num_transcoders; i++) {
+ err_printf(m, " CPU transcoder: %c\n",
+ transcoder_name(error->transcoder[i].cpu_transcoder));
+ err_printf(m, " CONF: %08x\n", error->transcoder[i].conf);
+ err_printf(m, " HTOTAL: %08x\n", error->transcoder[i].htotal);
+ err_printf(m, " HBLANK: %08x\n", error->transcoder[i].hblank);
+ err_printf(m, " HSYNC: %08x\n", error->transcoder[i].hsync);
+ err_printf(m, " VTOTAL: %08x\n", error->transcoder[i].vtotal);
+ err_printf(m, " VBLANK: %08x\n", error->transcoder[i].vblank);
+ err_printf(m, " VSYNC: %08x\n", error->transcoder[i].vsync);
+ }
}
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html