This is a note to let you know that I've just added the patch titled
parisc: Fix interrupt routing for C8000 serial ports
to the 3.10-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
parisc-fix-interrupt-routing-for-c8000-serial-ports.patch
and it can be found in the queue-3.10 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
>From dd5e6d6a3db09b16b7c222943977865eead88cc3 Mon Sep 17 00:00:00 2001
From: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
Date: Tue, 30 Jul 2013 02:02:16 +0200
Subject: parisc: Fix interrupt routing for C8000 serial ports
From: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
commit dd5e6d6a3db09b16b7c222943977865eead88cc3 upstream.
We can't use dev->mod_index for selecting the interrupt routing entry,
because it's not an index into interrupt routing table. It will be even
wrong on a machine with 2 CPUs (4 cores). But all needed information is
contained in the PAT entries for the serial ports. mod[0] contains the
iosapic address and mod_info has some indications for the interrupt
input (at least it looks like it). This patch implements the searching
for the right iosapic and uses this interrupt input information.
Signed-off-by: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
Signed-off-by: Helge Deller <deller@xxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
arch/parisc/include/asm/parisc-device.h | 3 ++
arch/parisc/kernel/inventory.c | 1
drivers/parisc/iosapic.c | 38 ++++++++++++++++++++++----------
drivers/tty/serial/8250/8250_gsc.c | 3 --
4 files changed, 32 insertions(+), 13 deletions(-)
--- a/arch/parisc/include/asm/parisc-device.h
+++ b/arch/parisc/include/asm/parisc-device.h
@@ -23,6 +23,7 @@ struct parisc_device {
/* generic info returned from pdc_pat_cell_module() */
unsigned long mod_info; /* PAT specific - Misc Module info */
unsigned long pmod_loc; /* physical Module location */
+ unsigned long mod0;
#endif
u64 dma_mask; /* DMA mask for I/O */
struct device dev;
@@ -61,4 +62,6 @@ parisc_get_drvdata(struct parisc_device
extern struct bus_type parisc_bus_type;
+int iosapic_serial_irq(struct parisc_device *dev);
+
#endif /*_ASM_PARISC_PARISC_DEVICE_H_*/
--- a/arch/parisc/kernel/inventory.c
+++ b/arch/parisc/kernel/inventory.c
@@ -211,6 +211,7 @@ pat_query_module(ulong pcell_loc, ulong
/* REVISIT: who is the consumer of this? not sure yet... */
dev->mod_info = pa_pdc_cell->mod_info; /* pass to PAT_GET_ENTITY() */
dev->pmod_loc = pa_pdc_cell->mod_location;
+ dev->mod0 = pa_pdc_cell->mod[0];
register_parisc_device(dev); /* advertise device */
--- a/drivers/parisc/iosapic.c
+++ b/drivers/parisc/iosapic.c
@@ -811,18 +811,28 @@ int iosapic_fixup_irq(void *isi_obj, str
return pcidev->irq;
}
-static struct iosapic_info *first_isi = NULL;
+static struct iosapic_info *iosapic_list;
#ifdef CONFIG_64BIT
-int iosapic_serial_irq(int num)
+int iosapic_serial_irq(struct parisc_device *dev)
{
- struct iosapic_info *isi = first_isi;
- struct irt_entry *irte = NULL; /* only used if PAT PDC */
+ struct iosapic_info *isi;
+ struct irt_entry *irte;
struct vector_info *vi;
- int isi_line; /* line used by device */
+ int cnt;
+ int intin;
+
+ intin = (dev->mod_info >> 24) & 15;
/* lookup IRT entry for isi/slot/pin set */
- irte = &irt_cell[num];
+ for (cnt = 0; cnt < irt_num_entry; cnt++) {
+ irte = &irt_cell[cnt];
+ if (COMPARE_IRTE_ADDR(irte, dev->mod0) &&
+ irte->dest_iosapic_intin == intin)
+ break;
+ }
+ if (cnt >= irt_num_entry)
+ return 0; /* no irq found, force polling */
DBG_IRT("iosapic_serial_irq(): irte %p %x %x %x %x %x %x %x %x\n",
irte,
@@ -834,11 +844,17 @@ int iosapic_serial_irq(int num)
irte->src_seg_id,
irte->dest_iosapic_intin,
(u32) irte->dest_iosapic_addr);
- isi_line = irte->dest_iosapic_intin;
+
+ /* search for iosapic */
+ for (isi = iosapic_list; isi; isi = isi->isi_next)
+ if (isi->isi_hpa == dev->mod0)
+ break;
+ if (!isi)
+ return 0; /* no iosapic found, force polling */
/* get vector info for this input line */
- vi = isi->isi_vector + isi_line;
- DBG_IRT("iosapic_serial_irq: line %d vi 0x%p\n", isi_line, vi);
+ vi = isi->isi_vector + intin;
+ DBG_IRT("iosapic_serial_irq: line %d vi 0x%p\n", iosapic_intin, vi);
/* If this IRQ line has already been setup, skip it */
if (vi->irte)
@@ -941,8 +957,8 @@ void *iosapic_register(unsigned long hpa
vip->irqline = (unsigned char) cnt;
vip->iosapic = isi;
}
- if (!first_isi)
- first_isi = isi;
+ isi->isi_next = iosapic_list;
+ iosapic_list = isi;
return isi;
}
--- a/drivers/tty/serial/8250/8250_gsc.c
+++ b/drivers/tty/serial/8250/8250_gsc.c
@@ -31,9 +31,8 @@ static int __init serial_init_chip(struc
int err;
#ifdef CONFIG_64BIT
- extern int iosapic_serial_irq(int cellnum);
if (!dev->irq && (dev->id.sversion == 0xad))
- dev->irq = iosapic_serial_irq(dev->mod_index-1);
+ dev->irq = iosapic_serial_irq(dev);
#endif
if (!dev->irq) {
Patches currently in stable-queue which might be from tsbogend@xxxxxxxxxxxxxxxx are
queue-3.10/parisc-fix-interrupt-routing-for-c8000-serial-ports.patch
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html