Re: [PATCH] mmc: sdhci-esdhc-imx: increase the pad I/O drive strength for DDR50 card

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 17/04/17 14:10, Haibo Chen wrote:
> Currently for DDR50 card, it need tuning in default. We meet tuning fail
> issue for DDR50 card and some data CRC error when DDR50 sd card works.
> 
> This is because the default pad I/O drive strength can't make sure DDR50
> card work stable. So increase the pad I/O drive strength for DDR50 card,
> and use pins_100mhz.
> 
> Tested-and-reported-by: Tim Harvey <tharvey@xxxxxxxxxxxxx>
> Signed-off-by: Haibo Chen <haibo.chen@xxxxxxx>
> Cc: stable@xxxxxxxxxxxxxxx # v4.4+

Acked-by: Adrian Hunter <adrian.hunter@xxxxxxxxx>

> ---
>  drivers/mmc/host/sdhci-esdhc-imx.c | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
> index cf666a0..abad67a 100644
> --- a/drivers/mmc/host/sdhci-esdhc-imx.c
> +++ b/drivers/mmc/host/sdhci-esdhc-imx.c
> @@ -830,6 +830,7 @@ static int esdhc_change_pinstate(struct sdhci_host *host,
>  
>  	switch (uhs) {
>  	case MMC_TIMING_UHS_SDR50:
> +	case MMC_TIMING_UHS_DDR50:
>  		pinctrl = imx_data->pins_100mhz;
>  		break;
>  	case MMC_TIMING_UHS_SDR104:
> 




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]