3.10-stable review patch. If anyone has any objections, please let me know. ------------------ From: Johan Hovold <jhovold@xxxxxxxxx> commit 5f8a2e68b679b41cc8e9b642f2f5aa45dd678641 upstream. Allocated urbs and buffers were never freed on errors in open. Signed-off-by: Johan Hovold <jhovold@xxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/usb/serial/mos7840.c | 25 +++++++++++++++++-------- 1 file changed, 17 insertions(+), 8 deletions(-) --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -914,20 +914,20 @@ static int mos7840_open(struct tty_struc status = mos7840_get_reg_sync(port, mos7840_port->SpRegOffset, &Data); if (status < 0) { dev_dbg(&port->dev, "Reading Spreg failed\n"); - return -1; + goto err; } Data |= 0x80; status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data); if (status < 0) { dev_dbg(&port->dev, "writing Spreg failed\n"); - return -1; + goto err; } Data &= ~0x80; status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data); if (status < 0) { dev_dbg(&port->dev, "writing Spreg failed\n"); - return -1; + goto err; } /* End of block to be checked */ @@ -936,7 +936,7 @@ static int mos7840_open(struct tty_struc &Data); if (status < 0) { dev_dbg(&port->dev, "Reading Controlreg failed\n"); - return -1; + goto err; } Data |= 0x08; /* Driver done bit */ Data |= 0x20; /* rx_disable */ @@ -944,7 +944,7 @@ static int mos7840_open(struct tty_struc mos7840_port->ControlRegOffset, Data); if (status < 0) { dev_dbg(&port->dev, "writing Controlreg failed\n"); - return -1; + goto err; } /* do register settings here */ /* Set all regs to the device default values. */ @@ -955,21 +955,21 @@ static int mos7840_open(struct tty_struc status = mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data); if (status < 0) { dev_dbg(&port->dev, "disabling interrupts failed\n"); - return -1; + goto err; } /* Set FIFO_CONTROL_REGISTER to the default value */ Data = 0x00; status = mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data); if (status < 0) { dev_dbg(&port->dev, "Writing FIFO_CONTROL_REGISTER failed\n"); - return -1; + goto err; } Data = 0xcf; status = mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data); if (status < 0) { dev_dbg(&port->dev, "Writing FIFO_CONTROL_REGISTER failed\n"); - return -1; + goto err; } Data = 0x03; @@ -1114,6 +1114,15 @@ static int mos7840_open(struct tty_struc /* mos7840_change_port_settings(mos7840_port,old_termios); */ return 0; +err: + for (j = 0; j < NUM_URBS; ++j) { + urb = mos7840_port->write_urb_pool[j]; + if (!urb) + continue; + kfree(urb->transfer_buffer); + usb_free_urb(urb); + } + return status; } /***************************************************************************** -- To unsubscribe from this list: send the line "unsubscribe stable" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html