From: Pierre-Louis Bossart <pierre-louis.bossart@xxxxxxxxxxxxxxx>
[ Upstream commit a50477e55fff69e1028f25624ee9fc9182d59b1f ]
The existing code assumes a 19.2 MHz MCLK as the default
hardware configuration. This is valid for CherryTrail but
not for Baytrail.
Add explicit MCLK configuration to set the 19.2 clock on/off
depending on DAPM events.
This is a prerequisite step to enable devices with Baytrail
and RT5645 such as Asus X205TA
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@xxxxxxxxxxxxxxx>
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
Signed-off-by: Sasha Levin <alexander.levin@xxxxxxxxxxx>
---
sound/soc/intel/boards/cht_bsw_rt5645.c | 84 ++++++++++++++++++++++++++++-----
1 file changed, 71 insertions(+), 13 deletions(-)
diff --git a/sound/soc/intel/boards/cht_bsw_rt5645.c b/sound/soc/intel/boards/cht_bsw_rt5645.c
index 5b3418a..9052561 100644
--- a/sound/soc/intel/boards/cht_bsw_rt5645.c
+++ b/sound/soc/intel/boards/cht_bsw_rt5645.c
@@ -24,6 +24,9 @@
#include <linux/acpi.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
+#include <asm/cpu_device_id.h>
+#include <asm/platform_sst_audio.h>
+#include <linux/clk.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/soc.h>
@@ -45,6 +48,7 @@ struct cht_mc_private {
struct snd_soc_jack jack;
struct cht_acpi_card *acpi_card;
char codec_name[16];
+ struct clk *mclk;
};
static inline struct snd_soc_dai *cht_get_codec_dai(struct snd_soc_card *card)
@@ -65,6 +69,7 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w,
struct snd_soc_dapm_context *dapm = w->dapm;
struct snd_soc_card *card = dapm->card;
struct snd_soc_dai *codec_dai;
+ struct cht_mc_private *ctx = snd_soc_card_get_drvdata(card);
int ret;
codec_dai = cht_get_codec_dai(card);
@@ -73,19 +78,30 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w,
return -EIO;
}
- if (!SND_SOC_DAPM_EVENT_OFF(event))
- return 0;
+ if (SND_SOC_DAPM_EVENT_ON(event)) {
+ if (ctx->mclk) {
+ ret = clk_prepare_enable(ctx->mclk);
+ if (ret < 0) {
+ dev_err(card->dev,
+ "could not configure MCLK state");
+ return ret;
+ }
+ }
+ } else {
+ /* Set codec sysclk source to its internal clock because codec PLL will
+ * be off when idle and MCLK will also be off when codec is
+ * runtime suspended. Codec needs clock for jack detection and button
+ * press. MCLK is turned off with clock framework or ACPI.
+ */
+ ret = snd_soc_dai_set_sysclk(codec_dai, RT5645_SCLK_S_RCCLK,
+ 48000 * 512, SND_SOC_CLOCK_IN);
+ if (ret < 0) {
+ dev_err(card->dev, "can't set codec sysclk: %d\n", ret);
+ return ret;
+ }
- /* Set codec sysclk source to its internal clock because codec PLL will
- * be off when idle and MCLK will also be off by ACPI when codec is
- * runtime suspended. Codec needs clock for jack detection and button
- * press.
- */
- ret = snd_soc_dai_set_sysclk(codec_dai, RT5645_SCLK_S_RCCLK,
- 0, SND_SOC_CLOCK_IN);
- if (ret < 0) {
- dev_err(card->dev, "can't set codec sysclk: %d\n", ret);
- return ret;
+ if (ctx->mclk)
+ clk_disable_unprepare(ctx->mclk);
}
return 0;
@@ -97,7 +113,7 @@ static const struct snd_soc_dapm_widget cht_dapm_widgets[] = {
SND_SOC_DAPM_MIC("Int Mic", NULL),
SND_SOC_DAPM_SPK("Ext Spk", NULL),
SND_SOC_DAPM_SUPPLY("Platform Clock", SND_SOC_NOPM, 0, 0,
- platform_clock_control, SND_SOC_DAPM_POST_PMD),
+ platform_clock_control, SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
};
static const struct snd_soc_dapm_route cht_rt5645_audio_map[] = {
@@ -225,6 +241,26 @@ static int cht_codec_init(struct snd_soc_pcm_runtime *runtime)
rt5645_set_jack_detect(codec, &ctx->jack, &ctx->jack, &ctx->jack);
+ if (ctx->mclk) {
+ /*
+ * The firmware might enable the clock at
+ * boot (this information may or may not
+ * be reflected in the enable clock register).
+ * To change the rate we must disable the clock
+ * first to cover these cases. Due to common
+ * clock framework restrictions that do not allow
+ * to disable a clock that has not been enabled,
+ * we need to enable the clock first.
+ */
+ ret = clk_prepare_enable(ctx->mclk);
+ if (!ret)
+ clk_disable_unprepare(ctx->mclk);
+
+ ret = clk_set_rate(ctx->mclk, CHT_PLAT_CLK_3_HZ);
+
+ if (ret)
+ dev_err(runtime->dev, "unable to set MCLK rate\n");
+ }
return ret;
}
@@ -349,6 +385,18 @@ static struct cht_acpi_card snd_soc_cards[] = {
static char cht_rt5640_codec_name[16]; /* i2c-<HID>:00 with HID being 8 chars */
+static bool is_valleyview(void)
+{
+ static const struct x86_cpu_id cpu_ids[] = {
+ { X86_VENDOR_INTEL, 6, 55 }, /* Valleyview, Bay Trail */
+ {}
+ };
+
+ if (!x86_match_cpu(cpu_ids))
+ return false;
+ return true;
+}
+
static int snd_cht_mc_probe(struct platform_device *pdev)
{
int ret_val = 0;
@@ -401,6 +449,16 @@ static int snd_cht_mc_probe(struct platform_device *pdev)
cht_dailink[dai_index].codec_name = cht_rt5640_codec_name;
}
+ if (is_valleyview()) {
+ drv->mclk = devm_clk_get(&pdev->dev, "pmc_plt_clk_3");
+ if (IS_ERR(drv->mclk)) {
+ dev_err(&pdev->dev,
+ "Failed to get MCLK from pmc_plt_clk_3: %ld\n",
+ PTR_ERR(drv->mclk));
+ return PTR_ERR(drv->mclk);
+ }
+ }
+
snd_soc_card_set_drvdata(card, drv);
ret_val = devm_snd_soc_register_card(&pdev->dev, card);
if (ret_val) {
--
2.9.3