From: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
[ Upstream commit 0d414268fb8d0844030f87027e904f69d96706be ]
Pull the register resource lookup out of thunder_pem_init() so we can
easily add a corresponding lookup using ACPI. No functional change
intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
Signed-off-by: Sasha Levin <alexander.levin@xxxxxxxxxxx>
---
drivers/pci/host/pci-thunder-pem.c | 50 ++++++++++++++++++++------------------
1 file changed, 27 insertions(+), 23 deletions(-)
diff --git a/drivers/pci/host/pci-thunder-pem.c b/drivers/pci/host/pci-thunder-pem.c
index 6abaf80..c3276ee 100644
--- a/drivers/pci/host/pci-thunder-pem.c
+++ b/drivers/pci/host/pci-thunder-pem.c
@@ -284,35 +284,16 @@ static int thunder_pem_config_write(struct pci_bus *bus, unsigned int devfn,
return pci_generic_config_write(bus, devfn, where, size, val);
}
-static int thunder_pem_init(struct pci_config_window *cfg)
+static int thunder_pem_init(struct device *dev, struct pci_config_window *cfg,
+ struct resource *res_pem)
{
- struct device *dev = cfg->parent;
- resource_size_t bar4_start;
- struct resource *res_pem;
struct thunder_pem_pci *pem_pci;
- struct platform_device *pdev;
-
- /* Only OF support for now */
- if (!dev->of_node)
- return -EINVAL;
+ resource_size_t bar4_start;
pem_pci = devm_kzalloc(dev, sizeof(*pem_pci), GFP_KERNEL);
if (!pem_pci)
return -ENOMEM;
- pdev = to_platform_device(dev);
-
- /*
- * The second register range is the PEM bridge to the PCIe
- * bus. It has a different config access method than those
- * devices behind the bridge.
- */
- res_pem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
- if (!res_pem) {
- dev_err(dev, "missing \"reg[1]\"property\n");
- return -EINVAL;
- }
-
pem_pci->pem_reg_base = devm_ioremap(dev, res_pem->start, 0x10000);
if (!pem_pci->pem_reg_base)
return -ENOMEM;
@@ -332,9 +313,32 @@ static int thunder_pem_init(struct pci_config_window *cfg)
return 0;
}
+static int thunder_pem_platform_init(struct pci_config_window *cfg)
+{
+ struct device *dev = cfg->parent;
+ struct platform_device *pdev = to_platform_device(dev);
+ struct resource *res_pem;
+
+ if (!dev->of_node)
+ return -EINVAL;
+
+ /*
+ * The second register range is the PEM bridge to the PCIe
+ * bus. It has a different config access method than those
+ * devices behind the bridge.
+ */
+ res_pem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ if (!res_pem) {
+ dev_err(dev, "missing \"reg[1]\"property\n");
+ return -EINVAL;
+ }
+
+ return thunder_pem_init(dev, cfg, res_pem);
+}
+
static struct pci_ecam_ops pci_thunder_pem_ops = {
.bus_shift = 24,
- .init = thunder_pem_init,
+ .init = thunder_pem_platform_init,
.pci_ops = {
.map_bus = pci_ecam_map_bus,
.read = thunder_pem_config_read,
--
2.9.3