The nci-device was never deregistered in the event that
fw-initialisation failed.
Fix this by moving the firmware initialisation before device
registration since the firmware work queue should be available before
registering.
Note that this depends on a recent fix that moved device-name
initialisation back to to nci_allocate_device() as the
firmware-workqueue name is now derived from the nfc-device name.
Fixes: 3194c6870158 ("NFC: nfcmrvl: add firmware download support")
Cc: stable <stable@xxxxxxxxxxxxxxx> # 4.4
Cc: Vincent Cuissard <cuissard@xxxxxxxxxxx>
Signed-off-by: Johan Hovold <johan@xxxxxxxxxx>
---
drivers/nfc/nfcmrvl/main.c | 16 +++++++++-------
1 file changed, 9 insertions(+), 7 deletions(-)
diff --git a/drivers/nfc/nfcmrvl/main.c b/drivers/nfc/nfcmrvl/main.c
index 3e3fc9588f10..a446590a71ca 100644
--- a/drivers/nfc/nfcmrvl/main.c
+++ b/drivers/nfc/nfcmrvl/main.c
@@ -158,26 +158,28 @@ struct nfcmrvl_private *nfcmrvl_nci_register_dev(enum nfcmrvl_phy phy,
goto error_free_gpio;
}
+ rc = nfcmrvl_fw_dnld_init(priv);
+ if (rc) {
+ nfc_err(dev, "failed to initialize FW download %d\n", rc);
+ goto error_free_dev;
+ }
+
nci_set_drvdata(priv->ndev, priv);
rc = nci_register_device(priv->ndev);
if (rc) {
nfc_err(dev, "nci_register_device failed %d\n", rc);
- goto error_free_dev;
+ goto error_fw_dnld_deinit;
}
/* Ensure that controller is powered off */
nfcmrvl_chip_halt(priv);
- rc = nfcmrvl_fw_dnld_init(priv);
- if (rc) {
- nfc_err(dev, "failed to initialize FW download %d\n", rc);
- goto error_free_dev;
- }
-
nfc_info(dev, "registered with nci successfully\n");
return priv;
+error_fw_dnld_deinit:
+ nfcmrvl_fw_dnld_deinit(priv);
error_free_dev:
nci_free_device(priv->ndev);
error_free_gpio:
--
2.12.2