4.9-stable review patch. If anyone has any objections, please let me know. ------------------ From: Chen-Yu Tsai <wens@xxxxxxxx> commit ac8616e4c81dded650dfade49a7da283565d37ce upstream. The MP style clocks support an mux with pre-dividers. While the driver correctly accounted for them in the .determine_rate callback, it did not in the .recalc_rate and .set_rate callbacks. This means when calculating the factors in the .set_rate callback, they would be off by a factor of the active pre-divider. Same goes for reading back the clock rate after it is set. Fixes: 2ab836db5097 ("clk: sunxi-ng: Add M-P factor clock support") Signed-off-by: Chen-Yu Tsai <wens@xxxxxxxx> Signed-off-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/clk/sunxi-ng/ccu_mp.c | 8 ++++++++ 1 file changed, 8 insertions(+) --- a/drivers/clk/sunxi-ng/ccu_mp.c +++ b/drivers/clk/sunxi-ng/ccu_mp.c @@ -85,6 +85,10 @@ static unsigned long ccu_mp_recalc_rate( unsigned int m, p; u32 reg; + /* Adjust parent_rate according to pre-dividers */ + ccu_mux_helper_adjust_parent_for_prediv(&cmp->common, &cmp->mux, + -1, &parent_rate); + reg = readl(cmp->common.base + cmp->common.reg); m = reg >> cmp->m.shift; @@ -114,6 +118,10 @@ static int ccu_mp_set_rate(struct clk_hw unsigned int m, p; u32 reg; + /* Adjust parent_rate according to pre-dividers */ + ccu_mux_helper_adjust_parent_for_prediv(&cmp->common, &cmp->mux, + -1, &parent_rate); + max_m = cmp->m.max ?: 1 << cmp->m.width; max_p = cmp->p.max ?: 1 << ((1 << cmp->p.width) - 1);