4.9-stable review patch. If anyone has any objections, please let me know. ------------------ From: Gary R Hook <ghook@xxxxxxx> commit 7c468447f40645fbf2a033dfdaa92b1957130d50 upstream. The CCP driver generally uses a round-robin approach when assigning operations to available CCPs. For the DMA engine, however, the DMA mappings of the SGs are associated with a specific CCP. When an IOMMU is enabled, the IOMMU is programmed based on this specific device. If the DMA operations are not performed by that specific CCP then addressing errors and I/O page faults will occur. Update the CCP driver to allow a specific CCP device to be requested for an operation and use this in the DMA engine support. Signed-off-by: Gary R Hook <gary.hook@xxxxxxx> Signed-off-by: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/crypto/ccp/ccp-dev.c | 5 ++++- drivers/crypto/ccp/ccp-dmaengine.c | 1 + include/linux/ccp.h | 2 +- 3 files changed, 6 insertions(+), 2 deletions(-) --- a/drivers/crypto/ccp/ccp-dev.c +++ b/drivers/crypto/ccp/ccp-dev.c @@ -283,11 +283,14 @@ EXPORT_SYMBOL_GPL(ccp_version); */ int ccp_enqueue_cmd(struct ccp_cmd *cmd) { - struct ccp_device *ccp = ccp_get_device(); + struct ccp_device *ccp; unsigned long flags; unsigned int i; int ret; + /* Some commands might need to be sent to a specific device */ + ccp = cmd->ccp ? cmd->ccp : ccp_get_device(); + if (!ccp) return -ENODEV; --- a/drivers/crypto/ccp/ccp-dmaengine.c +++ b/drivers/crypto/ccp/ccp-dmaengine.c @@ -390,6 +390,7 @@ static struct ccp_dma_desc *ccp_create_d goto err; ccp_cmd = &cmd->ccp_cmd; + ccp_cmd->ccp = chan->ccp; ccp_pt = &ccp_cmd->u.passthru_nomap; ccp_cmd->flags = CCP_CMD_MAY_BACKLOG; ccp_cmd->flags |= CCP_CMD_PASSTHRU_NO_DMA_MAP; --- a/include/linux/ccp.h +++ b/include/linux/ccp.h @@ -556,7 +556,7 @@ enum ccp_engine { * struct ccp_cmd - CPP operation request * @entry: list element (ccp driver use only) * @work: work element used for callbacks (ccp driver use only) - * @ccp: CCP device to be run on (ccp driver use only) + * @ccp: CCP device to be run on * @ret: operation return code (ccp driver use only) * @flags: cmd processing flags * @engine: CCP operation to perform