This is a note to let you know that I've just added the patch titled
mmc: sdhci-of-arasan: fix incorrect timeout clock
to the 4.9-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
mmc-sdhci-of-arasan-fix-incorrect-timeout-clock.patch
and it can be found in the queue-4.9 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
>From 16681037e75ce08f2980ac5dbb03414429c7a55d Mon Sep 17 00:00:00 2001
From: Anssi Hannula <anssi.hannula@xxxxxxxxxx>
Date: Mon, 13 Feb 2017 14:06:10 +0200
Subject: mmc: sdhci-of-arasan: fix incorrect timeout clock
From: Anssi Hannula <anssi.hannula@xxxxxxxxxx>
commit 16681037e75ce08f2980ac5dbb03414429c7a55d upstream.
sdhci_arasan_get_timeout_clock() divides the frequency it has with (1 <<
(13 + divisor)).
However, the divisor is not some Arasan-specific value, but instead is
just the Data Timeout Counter Value from the SDHCI Timeout Control
Register.
Applying it here like this is wrong as the sdhci driver already takes
that value into account when calculating timeouts, and in fact it *sets*
that register value based on how long a timeout is wanted.
Additionally, sdhci core interprets the .get_timeout_clock callback
return value as if it were read from hardware registers, i.e. the unit
should be kHz or MHz depending on SDHCI_TIMEOUT_CLK_UNIT capability bit.
This bit is set at least on the tested Zynq-7000 SoC.
With the tested hardware (SDHCI_TIMEOUT_CLK_UNIT set) this results in
too high a timeout clock rate being reported, causing the core to use
longer-than-needed timeouts. Additionally, on a partitioned MMC
(therefore having erase_group_def bit set) mmc_calc_max_discard()
disables discard support as it looks like controller does not support
the long timeouts needed for that.
Do not apply the extra divisor and return the timeout clock in the
expected unit.
Tested with a Zynq-7000 SoC and a partitioned Toshiba THGBMAG5A1JBAWR
eMMC card.
Signed-off-by: Anssi Hannula <anssi.hannula@xxxxxxxxxx>
Fixes: e3ec3a3d11ad ("mmc: arasan: Add driver for Arasan SDHCI")
Signed-off-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/mmc/host/sdhci-of-arasan.c | 14 +++++---------
1 file changed, 5 insertions(+), 9 deletions(-)
--- a/drivers/mmc/host/sdhci-of-arasan.c
+++ b/drivers/mmc/host/sdhci-of-arasan.c
@@ -28,13 +28,9 @@
#include "sdhci-pltfm.h"
#include <linux/of.h>
-#define SDHCI_ARASAN_CLK_CTRL_OFFSET 0x2c
#define SDHCI_ARASAN_VENDOR_REGISTER 0x78
#define VENDOR_ENHANCED_STROBE BIT(0)
-#define CLK_CTRL_TIMEOUT_SHIFT 16
-#define CLK_CTRL_TIMEOUT_MASK (0xf << CLK_CTRL_TIMEOUT_SHIFT)
-#define CLK_CTRL_TIMEOUT_MIN_EXP 13
#define PHY_CLK_TOO_SLOW_HZ 400000
@@ -163,15 +159,15 @@ static int sdhci_arasan_syscon_write(str
static unsigned int sdhci_arasan_get_timeout_clock(struct sdhci_host *host)
{
- u32 div;
unsigned long freq;
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
- div = readl(host->ioaddr + SDHCI_ARASAN_CLK_CTRL_OFFSET);
- div = (div & CLK_CTRL_TIMEOUT_MASK) >> CLK_CTRL_TIMEOUT_SHIFT;
+ /* SDHCI timeout clock is in kHz */
+ freq = DIV_ROUND_UP(clk_get_rate(pltfm_host->clk), 1000);
- freq = clk_get_rate(pltfm_host->clk);
- freq /= 1 << (CLK_CTRL_TIMEOUT_MIN_EXP + div);
+ /* or in MHz */
+ if (host->caps & SDHCI_TIMEOUT_CLK_UNIT)
+ freq = DIV_ROUND_UP(freq, 1000);
return freq;
}
Patches currently in stable-queue which might be from anssi.hannula@xxxxxxxxxx are
queue-4.9/mmc-sdhci-of-arasan-fix-incorrect-timeout-clock.patch