Re: [REGRESSION][Stable][v3.12.y][v4.4.y][v4.9.y][v4.10.y][v4.11-rc1] scsi: storvsc: properly set residual data length on errors

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 03/27/2017 06:14 PM, Stephen Hemminger wrote:
> Are you sure the real problem is not the one fixed by this commit?
>
> commit f1c635b439a5c01776fe3a25b1e2dc546ea82e6f
> Author: Stephen Hemminger <stephen@xxxxxxxxxxxxxxxxxx>
> Date:   Tue Mar 7 09:15:53 2017 -0800
>
>     scsi: storvsc: Workaround for virtual DVD SCSI version
>     
>     Hyper-V host emulation of SCSI for virtual DVD device reports SCSI
>     version 0 (UNKNOWN) but is still capable of supporting REPORTLUN.
>     
>     Without this patch, a GEN2 Linux guest on Hyper-V will not boot 4.11
>     successfully with virtual DVD ROM device. What happens is that the SCSI
>     scan process falls back to doing sequential probing by INQUIRY.  But the
>     storvsc driver has a previous workaround that masks/blocks all errors
>     reports from INQUIRY (or MODE_SENSE) commands.  This workaround causes
>     the scan to then populate a full set of bogus LUN's on the target and
>     then sends kernel spinning off into a death spiral doing block reads on
>     the non-existent LUNs.
>     
>     By setting the correct blacklist flags, the target with the DVD device
>     is scanned with REPORTLUN and that works correctly.
>     
>     Patch needs to go in current 4.11, it is safe but not necessary in older
>     kernels.
>     
>     Signed-off-by: Stephen Hemminger <sthemmin@xxxxxxxxxxxxx>
>     Reviewed-by: K. Y. Srinivasan <kys@xxxxxxxxxxxxx>
>     Reviewed-by: Christoph Hellwig <hch@xxxxxx>
>     Signed-off-by: Martin K. Petersen <martin.petersen@xxxxxxxxxx>
>
> -----Original Message-----
> From: Joseph Salisbury [mailto:joseph.salisbury@xxxxxxxxxxxxx] 
> Sent: Monday, March 27, 2017 1:22 PM
> To: Long Li <longli@xxxxxxxxxxxxx>
> Cc: KY Srinivasan <kys@xxxxxxxxxxxxx>; Martin K. Petersen <martin.petersen@xxxxxxxxxx>; Haiyang Zhang <haiyangz@xxxxxxxxxxxxx>; Stephen Hemminger <sthemmin@xxxxxxxxxxxxx>; jejb@xxxxxxxxxxxxxxxxxx; devel@xxxxxxxxxxxxxxxxxxxxxx; linux-scsi <linux-scsi@xxxxxxxxxxxxxxx>; LKML <linux-kernel@xxxxxxxxxxxxxxx>; stable@xxxxxxxxxxxxxxx; Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
> Subject: [REGRESSION][Stable][v3.12.y][v4.4.y][v4.9.y][v4.10.y][v4.11-rc1] scsi: storvsc: properly set residual data length on errors
>
> Hi Long Li,
>
> A kernel bug report was opened against Ubuntu [0].  After a kernel
> bisect, it was found that reverting the following commit resolved this bug:
>
> commit 40630f462824ee24bc00d692865c86c3828094e0
> Author: Long Li <longli@xxxxxxxxxxxxx>
> Date:   Wed Dec 14 18:46:03 2016 -0800
>
>     scsi: storvsc: properly set residual data length on errors
>
>
> The regression was introduced in mainline as of v4.11-rc1.  It was also
> cc'd to stable and has landed in v3.12.y, v4.4.y, v4.9.y and v4.10.y.
>
>
> This regression seems pretty severe since it's preventing virtual
> machines from booting.  It's affecting a couple of users so far.  I was
> hoping to get your feedback, since you are the patch author.  Do you
> think gathering any additional data will help diagnose this issue, or
> would it be best to submit a revert request?
>
>
> Thanks,
>
> Joe
>
>
> [0] http://pad.lv/1674635
>
>
Thanks for the pointer, Stephen.  I'll have this patch tested and
respond with the results.


Joe




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]