Patch "usb: musb: cppi41: don't check early-TX-interrupt for Isoch transfer" has been added to the 4.10-stable tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This is a note to let you know that I've just added the patch titled

    usb: musb: cppi41: don't check early-TX-interrupt for Isoch transfer

to the 4.10-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     usb-musb-cppi41-don-t-check-early-tx-interrupt-for-isoch-transfer.patch
and it can be found in the queue-4.10 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.


>From 0090114d336a9604aa2d90bc83f20f7cd121b76c Mon Sep 17 00:00:00 2001
From: Bin Liu <b-liu@xxxxxx>
Date: Fri, 10 Mar 2017 14:43:35 -0600
Subject: usb: musb: cppi41: don't check early-TX-interrupt for Isoch transfer

From: Bin Liu <b-liu@xxxxxx>

commit 0090114d336a9604aa2d90bc83f20f7cd121b76c upstream.

The CPPI 4.1 driver polls register to workaround the premature TX
interrupt issue, but it causes audio playback underrun when triggered in
Isoch transfers.

Isoch doesn't do back-to-back transfers, the TX should be done by the
time the next transfer is scheduled. So skip this polling workaround for
Isoch transfer.

Fixes: a655f481d83d6 ("usb: musb: musb_cppi41: handle pre-mature TX complete interrupt")
Reported-by: Alexandre Bailon <abailon@xxxxxxxxxxxx>
Acked-by: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
Tested-by: Alexandre Bailon <abailon@xxxxxxxxxxxx>
Signed-off-by: Bin Liu <b-liu@xxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
 drivers/usb/musb/musb_cppi41.c |   23 +++++++++++++++++++++--
 1 file changed, 21 insertions(+), 2 deletions(-)

--- a/drivers/usb/musb/musb_cppi41.c
+++ b/drivers/usb/musb/musb_cppi41.c
@@ -231,8 +231,27 @@ static void cppi41_dma_callback(void *pr
 			transferred < cppi41_channel->packet_sz)
 		cppi41_channel->prog_len = 0;
 
-	if (cppi41_channel->is_tx)
-		empty = musb_is_tx_fifo_empty(hw_ep);
+	if (cppi41_channel->is_tx) {
+		u8 type;
+
+		if (is_host_active(musb))
+			type = hw_ep->out_qh->type;
+		else
+			type = hw_ep->ep_in.type;
+
+		if (type == USB_ENDPOINT_XFER_ISOC)
+			/*
+			 * Don't use the early-TX-interrupt workaround below
+			 * for Isoch transfter. Since Isoch are periodic
+			 * transfer, by the time the next transfer is
+			 * scheduled, the current one should be done already.
+			 *
+			 * This avoids audio playback underrun issue.
+			 */
+			empty = true;
+		else
+			empty = musb_is_tx_fifo_empty(hw_ep);
+	}
 
 	if (!cppi41_channel->is_tx || empty) {
 		cppi41_trans_done(cppi41_channel);


Patches currently in stable-queue which might be from b-liu@xxxxxx are

queue-4.10/usb-musb-cppi41-don-t-check-early-tx-interrupt-for-isoch-transfer.patch



[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]