This is a note to let you know that I've just added the patch titled net: bcmgenet: remove bcmgenet_internal_phy_setup() to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary The filename of the patch is: net-bcmgenet-remove-bcmgenet_internal_phy_setup.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable@xxxxxxxxxxxxxxx> know about it. >From foo@baz Mon Mar 27 18:22:09 CEST 2017 From: Doug Berger <opendmb@xxxxxxxxx> Date: Tue, 21 Mar 2017 14:01:06 -0700 Subject: net: bcmgenet: remove bcmgenet_internal_phy_setup() From: Doug Berger <opendmb@xxxxxxxxx> [ Upstream commit 31739eae738ccbe8b9d627c3f2251017ca03f4d2 ] Commit 6ac3ce8295e6 ("net: bcmgenet: Remove excessive PHY reset") removed the bcmgenet_mii_reset() function from bcmgenet_power_up() and bcmgenet_internal_phy_setup() functions. In so doing it broke the reset of the internal PHY devices used by the GENETv1-GENETv3 which required this reset before the UniMAC was enabled. It also broke the internal GPHY devices used by the GENETv4 because the config_init that installed the AFE workaround was no longer occurring after the reset of the GPHY performed by bcmgenet_phy_power_set() in bcmgenet_internal_phy_setup(). In addition the code in bcmgenet_internal_phy_setup() related to the "enable APD" comment goes with the bcmgenet_mii_reset() so it should have also been removed. Commit bd4060a6108b ("net: bcmgenet: Power on integrated GPHY in bcmgenet_power_up()") moved the bcmgenet_phy_power_set() call to the bcmgenet_power_up() function, but failed to remove it from the bcmgenet_internal_phy_setup() function. Had it done so, the bcmgenet_internal_phy_setup() function would have been empty and could have been removed at that time. Commit 5dbebbb44a6a ("net: bcmgenet: Software reset EPHY after power on") was submitted to correct the functional problems introduced by commit 6ac3ce8295e6 ("net: bcmgenet: Remove excessive PHY reset"). It was included in v4.4 and made available on 4.3-stable. Unfortunately, it didn't fully revert the commit because this bcmgenet_mii_reset() doesn't apply the soft reset to the internal GPHY used by GENETv4 like the previous one did. This prevents the restoration of the AFE work- arounds for internal GPHY devices after the bcmgenet_phy_power_set() in bcmgenet_internal_phy_setup(). This commit takes the alternate approach of removing the unnecessary bcmgenet_internal_phy_setup() function which shouldn't have been in v4.3 so that when bcmgenet_mii_reset() was restored it should have only gone into bcmgenet_power_up(). This will avoid the problems while also removing the redundancy (and hopefully some of the confusion). Fixes: 6ac3ce8295e6 ("net: bcmgenet: Remove excessive PHY reset") Signed-off-by: Doug Berger <opendmb@xxxxxxxxx> Reviewed-by: Florian Fainelli <f.fainelli@xxxxxxxxx> Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/net/ethernet/broadcom/genet/bcmmii.c | 15 --------------- 1 file changed, 15 deletions(-) --- a/drivers/net/ethernet/broadcom/genet/bcmmii.c +++ b/drivers/net/ethernet/broadcom/genet/bcmmii.c @@ -220,20 +220,6 @@ void bcmgenet_phy_power_set(struct net_d udelay(60); } -static void bcmgenet_internal_phy_setup(struct net_device *dev) -{ - struct bcmgenet_priv *priv = netdev_priv(dev); - u32 reg; - - /* Power up PHY */ - bcmgenet_phy_power_set(dev, true); - /* enable APD */ - reg = bcmgenet_ext_readl(priv, EXT_EXT_PWR_MGMT); - reg |= EXT_PWR_DN_EN_LD; - bcmgenet_ext_writel(priv, reg, EXT_EXT_PWR_MGMT); - bcmgenet_mii_reset(dev); -} - static void bcmgenet_moca_phy_setup(struct bcmgenet_priv *priv) { u32 reg; @@ -281,7 +267,6 @@ int bcmgenet_mii_config(struct net_devic if (priv->internal_phy) { phy_name = "internal PHY"; - bcmgenet_internal_phy_setup(dev); } else if (priv->phy_interface == PHY_INTERFACE_MODE_MOCA) { phy_name = "MoCA"; bcmgenet_moca_phy_setup(priv); Patches currently in stable-queue which might be from opendmb@xxxxxxxxx are queue-4.4/net-bcmgenet-remove-bcmgenet_internal_phy_setup.patch