FAILED: patch "[PATCH] scsi: sd: Check for unaligned partial completion" failed to apply to 4.10-stable tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The patch below does not apply to the 4.10-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@xxxxxxxxxxxxxxx>.

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

>From c46f09175dabd5dd6a1507f36250bfa734a0156e Mon Sep 17 00:00:00 2001
From: Damien Le Moal <damien.lemoal@xxxxxxx>
Date: Wed, 1 Mar 2017 17:27:00 +0900
Subject: [PATCH] scsi: sd: Check for unaligned partial completion

Commit <f2e767bb5d6e> ("mpt3sas: Force request partial completion
alignment") was not considering the case of commands not operating on
logical block size units (e.g. REQ_OP_ZONE_REPORT and its 64B aligned
partial replies). In this case, forcing alignment of resid to the device
logical block size can break the command result, e.g. in the case of
REQ_OP_ZONE_REPORT, the exact number of zone reported by the device.

Move the partial completion alignement check of mpt3sas to a generic
implementation in sd_done(). The check is added within the default
section of the initial req_op() switch case so that the report and reset
zone commands are ignored. In addition, as sd_done() is not called for
passthrough requests, resid corrections are not done as intended by the
initial mpt3sas patch.

Fixes: f2e767bb5d6e ("mpt3sas: Force request partial completion alignment")
Cc: <stable@xxxxxxxxxxxxxxx> # v4.10
Signed-off-by: Damien Le Moal <damien.lemoal@xxxxxxx>
Acked-by: Christoph Hellwig <hch@xxxxxx>
Reviewed-by: Bart Van Assche <bart.vanassche@xxxxxxxxxxx>
Signed-off-by: Martin K. Petersen <martin.petersen@xxxxxxxxxx>

diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
index 46e866c36c8a..69c29c560575 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -4677,7 +4677,6 @@ _scsih_io_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)
 	struct MPT3SAS_DEVICE *sas_device_priv_data;
 	u32 response_code = 0;
 	unsigned long flags;
-	unsigned int sector_sz;
 
 	mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply);
 
@@ -4742,20 +4741,6 @@ _scsih_io_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)
 	}
 
 	xfer_cnt = le32_to_cpu(mpi_reply->TransferCount);
-
-	/* In case of bogus fw or device, we could end up having
-	 * unaligned partial completion. We can force alignment here,
-	 * then scsi-ml does not need to handle this misbehavior.
-	 */
-	sector_sz = scmd->device->sector_size;
-	if (unlikely(!blk_rq_is_passthrough(scmd->request) && sector_sz &&
-		     xfer_cnt % sector_sz)) {
-		sdev_printk(KERN_INFO, scmd->device,
-		    "unaligned partial completion avoided (xfer_cnt=%u, sector_sz=%u)\n",
-			    xfer_cnt, sector_sz);
-		xfer_cnt = round_down(xfer_cnt, sector_sz);
-	}
-
 	scsi_set_resid(scmd, scsi_bufflen(scmd) - xfer_cnt);
 	if (ioc_status & MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE)
 		log_info =  le32_to_cpu(mpi_reply->IOCLogInfo);
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index c7839f6c35cc..fb9b4d29af0b 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -1783,6 +1783,8 @@ static int sd_done(struct scsi_cmnd *SCpnt)
 {
 	int result = SCpnt->result;
 	unsigned int good_bytes = result ? 0 : scsi_bufflen(SCpnt);
+	unsigned int sector_size = SCpnt->device->sector_size;
+	unsigned int resid;
 	struct scsi_sense_hdr sshdr;
 	struct scsi_disk *sdkp = scsi_disk(SCpnt->request->rq_disk);
 	struct request *req = SCpnt->request;
@@ -1813,6 +1815,21 @@ static int sd_done(struct scsi_cmnd *SCpnt)
 			scsi_set_resid(SCpnt, blk_rq_bytes(req));
 		}
 		break;
+	default:
+		/*
+		 * In case of bogus fw or device, we could end up having
+		 * an unaligned partial completion. Check this here and force
+		 * alignment.
+		 */
+		resid = scsi_get_resid(SCpnt);
+		if (resid & (sector_size - 1)) {
+			sd_printk(KERN_INFO, sdkp,
+				"Unaligned partial completion (resid=%u, sector_sz=%u)\n",
+				resid, sector_size);
+			resid = min(scsi_bufflen(SCpnt),
+				    round_up(resid, sector_size));
+			scsi_set_resid(SCpnt, resid);
+		}
 	}
 
 	if (result) {




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]