This is a note to let you know that I've just added the patch titled
serial: 8250_pci: Add MKS Tenta SCOM-0800 and SCOM-0801 cards
to the 4.9-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
serial-8250_pci-add-mks-tenta-scom-0800-and-scom-0801-cards.patch
and it can be found in the queue-4.9 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
>From 1c9c858e2ff8ae8024a3d75d2ed080063af43754 Mon Sep 17 00:00:00 2001
From: Ian Abbott <abbotti@xxxxxxxxx>
Date: Fri, 3 Feb 2017 20:25:00 +0000
Subject: serial: 8250_pci: Add MKS Tenta SCOM-0800 and SCOM-0801 cards
From: Ian Abbott <abbotti@xxxxxxxxx>
commit 1c9c858e2ff8ae8024a3d75d2ed080063af43754 upstream.
The MKS Instruments SCOM-0800 and SCOM-0801 cards (originally by Tenta
Technologies) are 3U CompactPCI serial cards with 4 and 8 serial ports,
respectively. The first 4 ports are implemented by an OX16PCI954 chip,
and the second 4 ports are implemented by an OX16C954 chip on a local
bus, bridged by the second PCI function of the OX16PCI954. The ports
are jumper-selectable as RS-232 and RS-422/485, and the UARTs use a
non-standard oscillator frequency of 20 MHz (base_baud = 1250000).
Signed-off-by: Ian Abbott <abbotti@xxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/tty/serial/8250/8250_pci.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -2688,6 +2688,8 @@ enum pci_board_num_t {
pbn_b0_4_1152000_200,
pbn_b0_8_1152000_200,
+ pbn_b0_4_1250000,
+
pbn_b0_2_1843200,
pbn_b0_4_1843200,
@@ -2919,6 +2921,13 @@ static struct pciserial_board pci_boards
.uart_offset = 0x200,
},
+ [pbn_b0_4_1250000] = {
+ .flags = FL_BASE0,
+ .num_ports = 4,
+ .base_baud = 1250000,
+ .uart_offset = 8,
+ },
+
[pbn_b0_2_1843200] = {
.flags = FL_BASE0,
.num_ports = 2,
@@ -5549,6 +5558,10 @@ static struct pci_device_id serial_pci_t
{ PCI_DEVICE(0x1c29, 0x1108), .driver_data = pbn_fintek_8 },
{ PCI_DEVICE(0x1c29, 0x1112), .driver_data = pbn_fintek_12 },
+ /* MKS Tenta SCOM-080x serial cards */
+ { PCI_DEVICE(0x1601, 0x0800), .driver_data = pbn_b0_4_1250000 },
+ { PCI_DEVICE(0x1601, 0xa801), .driver_data = pbn_b0_4_1250000 },
+
/*
* These entries match devices with class COMMUNICATION_SERIAL,
* COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL
Patches currently in stable-queue which might be from abbotti@xxxxxxxxx are
queue-4.9/serial-8250_pci-add-mks-tenta-scom-0800-and-scom-0801-cards.patch