This is a note to let you know that I've just added the patch titled pwm: pca9685: Fix period change with same duty cycle to the 4.10-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary The filename of the patch is: pwm-pca9685-fix-period-change-with-same-duty-cycle.patch and it can be found in the queue-4.10 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable@xxxxxxxxxxxxxxx> know about it. >From 8d254a340efb12b40c4c1ff25a48a4f48f7bbd6b Mon Sep 17 00:00:00 2001 From: Clemens Gruber <clemens.gruber@xxxxxxxxxxxx> Date: Tue, 13 Dec 2016 16:52:50 +0100 Subject: pwm: pca9685: Fix period change with same duty cycle From: Clemens Gruber <clemens.gruber@xxxxxxxxxxxx> commit 8d254a340efb12b40c4c1ff25a48a4f48f7bbd6b upstream. When first implementing support for changing the output frequency, an optimization was added to continue the PWM after changing the prescaler without having to reprogram the ON and OFF registers for the duty cycle, in case the duty cycle stayed the same. This was flawed, because we compared the absolute value of the duty cycle in nanoseconds instead of the ratio to the period. Fix the problem by removing the shortcut. Fixes: 01ec8472009c9 ("pwm-pca9685: Support changing the output frequency") Signed-off-by: Clemens Gruber <clemens.gruber@xxxxxxxxxxxx> Reviewed-by: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx> Signed-off-by: Thierry Reding <thierry.reding@xxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/pwm/pwm-pca9685.c | 11 ----------- 1 file changed, 11 deletions(-) --- a/drivers/pwm/pwm-pca9685.c +++ b/drivers/pwm/pwm-pca9685.c @@ -65,7 +65,6 @@ #define PCA9685_MAXCHAN 0x10 #define LED_FULL (1 << 4) -#define MODE1_RESTART (1 << 7) #define MODE1_SLEEP (1 << 4) #define MODE2_INVRT (1 << 4) #define MODE2_OUTDRV (1 << 2) @@ -117,16 +116,6 @@ static int pca9685_pwm_config(struct pwm udelay(500); pca->period_ns = period_ns; - - /* - * If the duty cycle did not change, restart PWM with - * the same duty cycle to period ratio and return. - */ - if (duty_ns == pca->duty_ns) { - regmap_update_bits(pca->regmap, PCA9685_MODE1, - MODE1_RESTART, 0x1); - return 0; - } } else { dev_err(chip->dev, "prescaler not set: period out of bounds!\n"); Patches currently in stable-queue which might be from clemens.gruber@xxxxxxxxxxxx are queue-4.10/pwm-pca9685-fix-period-change-with-same-duty-cycle.patch