3.16.42-rc1 review patch. If anyone has any objections, please let me know.
------------------
From: Felipe Balbi <felipe.balbi@xxxxxxxxxxxxxxx>
commit eaa496ffaaf19591fe471a36cef366146eeb9153 upstream.
ep->mult is supposed to be set to Isochronous and
Interrupt Endapoint's multiplier value. This value
is computed from different places depending on the
link speed.
If we're dealing with HighSpeed, then it's part of
bits [12:11] of wMaxPacketSize. This case wasn't
taken into consideration before.
While at that, also make sure the ep->mult defaults
to one so drivers can use it unconditionally and
assume they'll never multiply ep->maxpacket to zero.
Signed-off-by: Felipe Balbi <felipe.balbi@xxxxxxxxxxxxxxx>
[bwh: Backported to 3.16: adjust filename]
Signed-off-by: Ben Hutchings <ben@xxxxxxxxxxxxxxx>
---
drivers/usb/gadget/composite.c | 9 +++++++--
drivers/usb/gadget/uvc_video.c | 2 +-
2 files changed, 8 insertions(+), 3 deletions(-)
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -147,7 +147,12 @@ ep_found:
_ep->desc = chosen_desc;
_ep->comp_desc = NULL;
_ep->maxburst = 0;
- _ep->mult = 0;
+ _ep->mult = 1;
+
+ if (g->speed == USB_SPEED_HIGH && (usb_endpoint_xfer_isoc(_ep->desc) ||
+ usb_endpoint_xfer_int(_ep->desc)))
+ _ep->mult = usb_endpoint_maxp_mult(_ep->desc);
+
if (!want_comp_desc)
return 0;
@@ -164,7 +169,7 @@ ep_found:
switch (usb_endpoint_type(_ep->desc)) {
case USB_ENDPOINT_XFER_ISOC:
/* mult: bits 1:0 of bmAttributes */
- _ep->mult = comp_desc->bmAttributes & 0x3;
+ _ep->mult = (comp_desc->bmAttributes & 0x3) + 1;
case USB_ENDPOINT_XFER_BULK:
case USB_ENDPOINT_XFER_INT:
_ep->maxburst = comp_desc->bMaxBurst + 1;
--- a/drivers/usb/gadget/uvc_video.c
+++ b/drivers/usb/gadget/uvc_video.c
@@ -240,7 +240,7 @@ uvc_video_alloc_requests(struct uvc_vide
req_size = video->ep->maxpacket
* max_t(unsigned int, video->ep->maxburst, 1)
- * (video->ep->mult + 1);
+ * (video->ep->mult);
for (i = 0; i < UVC_NUM_REQUESTS; ++i) {
video->req_buffer[i] = kmalloc(req_size, GFP_KERNEL);