[PATCH 3.2 111/199] mmc: mxs-mmc: Fix additional cycles after transmission stop

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



3.2.87-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Stefan Wahren <stefan.wahren@xxxxxxxx>

commit 01167c7b9cbf099c69fe411a228e4e9c7104e123 upstream.

According to the code the intention is to append 8 SCK cycles
instead of 4 at end of a MMC_STOP_TRANSMISSION command. But this
will never happened because it's an AC command not an ADTC command.
So fix this by moving the statement into the right function.

Signed-off-by: Stefan Wahren <stefan.wahren@xxxxxxxx>
Fixes: e4243f13d10e (mmc: mxs-mmc: add mmc host driver for i.MX23/28)
Signed-off-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
Signed-off-by: Ben Hutchings <ben@xxxxxxxxxxxxxxx>
---
 drivers/mmc/host/mxs-mmc.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/drivers/mmc/host/mxs-mmc.c
+++ b/drivers/mmc/host/mxs-mmc.c
@@ -386,6 +386,9 @@ static void mxs_mmc_ac(struct mxs_mmc_ho
 	cmd0 = BF_SSP(cmd->opcode, CMD0_CMD);
 	cmd1 = cmd->arg;
 
+	if (cmd->opcode == MMC_STOP_TRANSMISSION)
+		cmd0 |= BM_SSP_CMD0_APPEND_8CYC;
+
 	if (host->sdio_irq_en) {
 		ctrl0 |= BM_SSP_CTRL0_SDIO_IRQ_CHECK;
 		cmd0 |= BM_SSP_CMD0_CONT_CLKING_EN | BM_SSP_CMD0_SLOW_CLKING_EN;
@@ -487,8 +490,7 @@ static void mxs_mmc_adtc(struct mxs_mmc_
 		       host->base + HW_SSP_BLOCK_SIZE);
 	}
 
-	if ((cmd->opcode == MMC_STOP_TRANSMISSION) ||
-	    (cmd->opcode == SD_IO_RW_EXTENDED))
+	if (cmd->opcode == SD_IO_RW_EXTENDED)
 		cmd0 |= BM_SSP_CMD0_APPEND_8CYC;
 
 	cmd1 = cmd->arg;




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]