This is a note to let you know that I've just added the patch titled
ath9k: use correct OTP register offsets for the AR9340 and AR9550
to the 4.9-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
ath9k-use-correct-otp-register-offsets-for-the-ar9340-and-ar9550.patch
and it can be found in the queue-4.9 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
>From c9f1e32600816d695f817477d56490bfc2ba43c6 Mon Sep 17 00:00:00 2001
From: Christian Lamparter <chunkeey@xxxxxxxxxxxxxx>
Date: Tue, 14 Feb 2017 20:10:30 +0100
Subject: ath9k: use correct OTP register offsets for the AR9340 and AR9550
From: Christian Lamparter <chunkeey@xxxxxxxxxxxxxx>
commit c9f1e32600816d695f817477d56490bfc2ba43c6 upstream.
This patch fixes the OTP register definitions for the AR934x and AR9550
WMAC SoC.
Previously, the ath9k driver was unable to initialize the integrated
WMAC on an Aerohive AP121:
| ath: phy0: timeout (1000 us) on reg 0x30018: 0xbadc0ffe & 0x00000007 != 0x00000004
| ath: phy0: timeout (1000 us) on reg 0x30018: 0xbadc0ffe & 0x00000007 != 0x00000004
| ath: phy0: Unable to initialize hardware; initialization status: -5
| ath9k ar934x_wmac: failed to initialize device
| ath9k: probe of ar934x_wmac failed with error -5
It turns out that the AR9300_OTP_STATUS and AR9300_OTP_DATA
definitions contain a typo.
Cc: Gabor Juhos <juhosg@xxxxxxxxxxx>
Fixes: add295a4afbdf5852d0 "ath9k: use correct OTP register offsets for AR9550"
Signed-off-by: Christian Lamparter <chunkeey@xxxxxxxxxxxxxx>
Signed-off-by: Chris Blake <chrisrblake93@xxxxxxxxx>
Signed-off-by: Kalle Valo <kvalo@xxxxxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/net/wireless/ath/ath9k/ar9003_eeprom.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h
@@ -73,13 +73,13 @@
#define AR9300_OTP_BASE \
((AR_SREV_9340(ah) || AR_SREV_9550(ah)) ? 0x30000 : 0x14000)
#define AR9300_OTP_STATUS \
- ((AR_SREV_9340(ah) || AR_SREV_9550(ah)) ? 0x30018 : 0x15f18)
+ ((AR_SREV_9340(ah) || AR_SREV_9550(ah)) ? 0x31018 : 0x15f18)
#define AR9300_OTP_STATUS_TYPE 0x7
#define AR9300_OTP_STATUS_VALID 0x4
#define AR9300_OTP_STATUS_ACCESS_BUSY 0x2
#define AR9300_OTP_STATUS_SM_BUSY 0x1
#define AR9300_OTP_READ_DATA \
- ((AR_SREV_9340(ah) || AR_SREV_9550(ah)) ? 0x3001c : 0x15f1c)
+ ((AR_SREV_9340(ah) || AR_SREV_9550(ah)) ? 0x3101c : 0x15f1c)
enum targetPowerHTRates {
HT_TARGET_RATE_0_8_16,
Patches currently in stable-queue which might be from chunkeey@xxxxxxxxxxxxxx are
queue-4.9/ath9k-use-correct-otp-register-offsets-for-the-ar9340-and-ar9550.patch