Make sure to check for the required interrupt-in endpoint to avoid dereferencing a NULL-pointer should a malicious device lack such an endpoint. Note that a fairly recent change purported to fix this issue, but added an insufficient test on the number of endpoints only, a test which can now be removed. Fixes: 4ec0ef3a8212 ("USB: iowarrior: fix oops with malicious USB descriptors") Fixes: 946b960d13c1 ("USB: add driver for iowarrior devices.") Cc: stable <stable@xxxxxxxxxxxxxxx> # 2.6.21 Signed-off-by: Johan Hovold <johan@xxxxxxxxxx> --- drivers/usb/misc/iowarrior.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/drivers/usb/misc/iowarrior.c b/drivers/usb/misc/iowarrior.c index 095778ff984d..3ad058cbe6ca 100644 --- a/drivers/usb/misc/iowarrior.c +++ b/drivers/usb/misc/iowarrior.c @@ -781,12 +781,6 @@ static int iowarrior_probe(struct usb_interface *interface, iface_desc = interface->cur_altsetting; dev->product_id = le16_to_cpu(udev->descriptor.idProduct); - if (iface_desc->desc.bNumEndpoints < 1) { - dev_err(&interface->dev, "Invalid number of endpoints\n"); - retval = -EINVAL; - goto error; - } - /* set up the endpoint information */ for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { endpoint = &iface_desc->endpoint[i].desc; @@ -797,6 +791,13 @@ static int iowarrior_probe(struct usb_interface *interface, /* this one will match for the IOWarrior56 only */ dev->int_out_endpoint = endpoint; } + + if (!dev->int_in_endpoint) { + dev_err(&interface->dev, "no interrupt-in endpoint found\n"); + retval = -ENODEV; + goto error; + } + /* we have to check the report_size often, so remember it in the endianness suitable for our machine */ dev->report_size = usb_endpoint_maxp(dev->int_in_endpoint); if ((dev->interface->cur_altsetting->desc.bInterfaceNumber == 0) && -- 2.12.0